ive been dreading this time..... injectors - Chevy and GMC Duramax Diesel Forum
01-04.5 LB7 Performance Parts Discussion Discussion of Performance Parts For the 01-04 LB7 Duramax Trucks No Advertising

DuramaxForum.com is the premier Chevy and GMC Duramax Diesel Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 01-04-2013, 07:21 PM   eBay Motors  #1 (permalink)
Junior Member
 
Join Date: Dec 2009
Location: bardstown, KY
Posts: 241
ive been dreading this time..... injectors

ok so i can get a new set of industrial 40% over injectors for 330 each with warranty, new not remans good deal?
__________________
2008 GMC ccsb 4wd white
MODS
5" strait pipe 6" tip DPF and EGR delete
raptor 100 lift pump
transgo shift kit
efi tow tune

leveled with 20x10 XD rapped with 305-55s A/T
((RED)) is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 01-05-2013, 05:48 AM   eBay Motors  #2 (permalink)
DuramaxForum Veteran
 
flyinelvis11's Avatar
 
Join Date: Mar 2010
Location: villa grove,il (because my wife lives here)
Posts: 1,824
I'd be willing to bet they aren't new injectors as Bosch is no longer making lb7 injectors. Let me say this in an attempt to avoid a shit storm. I have II 45% overs in my truck and I wish I would have bought them from exergy engineering instead. Read the fine print about their warranty ....
__________________
Wayne
Woller Farms Sellers, IL "we raise hell, pays the same as grain (nothing)"
04 GMC SLT cc/sb LB7 "big golden delicious"
s&b intake, banks exhaust, II silver bullet turbo, proflow headers, EFI live by bobo, ATS duel fueler, II 45% overs, ADII 165 lift pump, suncoast trans and ml converter
04 Chevy ec/sb LB7 "arrival blue lithuanian truck"
banks intake, silverline dual exhaust, EFI live DSP5 by Idaho Rob, BD diesel trans pan

Quote:
Originally Posted by mike diesel View Post
well yea bitch, i like duramax forum.
Quote:
Originally Posted by flyinelvis11 View Post
i'll let you use anything i got except my wife and my truck; it's too easy to throw a rod in either one):h

Last edited by flyinelvis11; 01-05-2013 at 05:55 AM.
flyinelvis11 is offline   Reply With Quote Quick reply to this message
Old 01-05-2013, 01:08 PM   eBay Motors  #3 (permalink)
DuramaxForum Veteran
 
boostnlb7's Avatar
 
Join Date: Nov 2012
Location: in the woods of michigan
Posts: 1,362
i went with brent at lincoln diesel for my 45% sticks... they are bosch reman oversized injectors, that is what u want is a bosch reman.. im very impressed with mine..
__________________
Eddie "boost master"
03 lb7 ccsb 4x4 inch lower than stock 20" mkw's 305/50/20 cooper zeons
auto meter boost/pyro/trans gauges- traction bars- 5'' DE 5" to 7" black mitre cut stack- PPE BIV- AD II 200 lift pump- edge insight CTS- spectre CAI- 45% over injectors- LMM cp3 & FPR -EFI live dsp5 from tony burkhard and danville performance
suncoast stage 4 trans, goerend "ML style" triple disc billet converter
Passin' 35psi on stock IHI with 290k on it
boostnlb7 is offline   Reply With Quote Quick reply to this message
Old 01-05-2013, 05:28 PM   eBay Motors  #4 (permalink)
Junior Member
 
Join Date: Jun 2012
Location: DFW, TX
Posts: 69
I bought the 90+hp nozzles and rebuilt the injectors myself ($900.00 Shippedfor all 8), from usdieselparts.com through an Ebay store. Very happy with mine. And their customer service is amazing, I had a couple questions while I was doing the tear down and they took the time to help me as soon as I called.
__________________
2001 Silverado 2500HD CCLB, 4x4 on the floor, Duramax/Allison
24X,000 miles and still going strong!
Muffler delete with side exit 3.5-4" with 5" tip.
Bosch 90+hp Injectors
PPE 70% CP3 inlet
14.6 mpg/avg before mods!
pjmayher is offline   Reply With Quote Quick reply to this message
Old 01-05-2013, 06:07 PM   eBay Motors  #5 (permalink)
DuramaxForum Veteran
 
boostnlb7's Avatar
 
Join Date: Nov 2012
Location: in the woods of michigan
Posts: 1,362
and a brand new injector, not reman, if they still made them would cost double 330..i would get some more opinions on where to get them from... there will be one name popping up more than others... and when u see how many other ppl went with that shop then yur chances of getting good parts are pretty good
__________________
Eddie "boost master"
03 lb7 ccsb 4x4 inch lower than stock 20" mkw's 305/50/20 cooper zeons
auto meter boost/pyro/trans gauges- traction bars- 5'' DE 5" to 7" black mitre cut stack- PPE BIV- AD II 200 lift pump- edge insight CTS- spectre CAI- 45% over injectors- LMM cp3 & FPR -EFI live dsp5 from tony burkhard and danville performance
suncoast stage 4 trans, goerend "ML style" triple disc billet converter
Passin' 35psi on stock IHI with 290k on it
boostnlb7 is offline   Reply With Quote Quick reply to this message
Old 01-07-2013, 09:08 PM   eBay Motors  #6 (permalink)
Junior Member
 
Join Date: Dec 2009
Location: bardstown, KY
Posts: 241
well the guy at industral siad they were new and not reman sticks and they were bosch but then again it was over the phone lol but boostnlb7 what did they run u? what kind of warranty do they have? how long have u had urs?
__________________
2008 GMC ccsb 4wd white
MODS
5" strait pipe 6" tip DPF and EGR delete
raptor 100 lift pump
transgo shift kit
efi tow tune

leveled with 20x10 XD rapped with 305-55s A/T
((RED)) is offline   Reply With Quote Quick reply to this message
Old 01-07-2013, 09:29 PM   eBay Motors  #7 (permalink)
DuramaxForum Fanatic
 
DURAMAXD219's Avatar
 
Join Date: Aug 2011
Location: Buckeye, AZ
Posts: 5,185
Ill answer that question, I paid less then 2200 for all 8 factory reman 45% over and the warranty is 1 year UNLIMITED MILE!!
__________________
Dylan - LB7
ECM/TCM Tuned by OPDT
45over Injectors by LDS
Built trans by Mike L
s464 by Me
615hp/1229tq
Arizona Diesel Club... Full of Drama
DURAMAXD219 is offline   Reply With Quote Quick reply to this message
Old 01-07-2013, 09:48 PM   eBay Motors  #8 (permalink)
Junior Member
 
Join Date: Dec 2009
Location: bardstown, KY
Posts: 241
not bad now to get the money to do it im also going to do head studs while im at it
__________________
2008 GMC ccsb 4wd white
MODS
5" strait pipe 6" tip DPF and EGR delete
raptor 100 lift pump
transgo shift kit
efi tow tune

leveled with 20x10 XD rapped with 305-55s A/T
((RED)) is offline   Reply With Quote Quick reply to this message
Old 01-07-2013, 10:39 PM   eBay Motors  #9 (permalink)
DuramaxForum Enthusiast
 
usafduramax's Avatar
 
Join Date: Apr 2010
Location: fairfield,ca
Posts: 2,335
I got exergy injectors, I heard a few bad things about industrial, and like everyone else says they aren't "new". I got 30% Exergy, they will flow match your injectors to within 5% of each other. just my thoughts, head studs and injectors aren't bad. the worst part was prying the head off the block for me
__________________
CHAD : 2002 CHEVROLET 2500HD ec/sb 4x4: Has enough to help me do the speed limit
30% exergy,s366,alligator stage 5, Idaho rob, arp studs, 6" tuff country 35x12.50 nitto trail grapplers, 17x9 xd spies all work done at home
Building a gas engine and need a dry sump oil system?check out A.R.E drysump.com
gold star of excellence award winner 2011
Quote:
Originally Posted by Duraskank View Post
5" = deeper sound. 4" = more of that pissed off two owls havin angry sex dmax sound at WOT.
a proud owner of a pound seven
usafduramax is offline   Reply With Quote Quick reply to this message
Old 01-07-2013, 11:32 PM   eBay Motors  #10 (permalink)
ATPTRUCKS
 
sickdiesel's Avatar
 
Join Date: Sep 2009
Location: Boise, ID
Posts: 12,461
Get a good quality injector from a good company like exergy, ddp, or chad riley at dpu.


Sent from my iPhone using AutoGuide.com App
__________________
Blackout :06 GMC lbz 4x4 Built motor, HSP twins, DDP Injectors, Self built trans 11.68@118.5
Over Built :07 Chevy lbz 4x4 Caged and built 10.42@134
The Car: 2014 Chevy Cruze 2.0 Diesel
Special thanks to: Mike L, Gtrippin, IdahoRob, Dmaxstore, HSP, ISSPRO, Yukon, Airdog

LIKE US ON FACEBOOK!
Adrenaline Truck Performance IDAHO ROB 208.685.1000
sickdiesel is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply


Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Chevy and GMC Duramax Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 09:10 PM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.

Search Engine Friendly URLs by vBSEO 3.3.2