anyway to put a limit on boost pressure

[derrplyr]

was driving today and stepped on it and noticed i flashed about 38 psi...sounds cool but i dont want to blow my engine or turbo. ive turned down my boost controller but can still hit 35. is there anyway i can limit boost or is my guage just off slightly

[Hondarider552]

turn boost control all the way down, and take ppe down a notch or two.

[derrplyr]

but then it wontt go as fast haha. theres nothing on the ppe like the edge where i can set a boost limit?

[Hondarider552]

you will only make boost if you have fuel; you make more fuel, you make more boost.

save your trans.

[derrplyr]

guess ill turn it down

[Hondarider552]

what level are you currently on ?

[Toypuller]

From what I have heard no more than about 32psi. Like honda said what level you running. You have to be on 5 or 6 i would imagine.

[DirtyMaxx03]

i see 30 on the lvl 4 tune so he has to be on lvl 6 and up i'd imagine.

[derrplyr]

nope just on 3 on ppe standard

[Killerbee]

You are overboosted. Better keep your MAF under 65 lb/min. That is a more important number to turbo health than straight boost.

With respect to your turbo, 35 psi at 2200 is a whole bunch healthier than 34 psi at 3200 rpm.