| Yeah the fabtech put the fronts out about an inch more than stock. Combine that with the aftermarket rims and the wide tires, I would say if you were looking at it from the side the factory flare covers about half the tire! It certainly takes getting used to, but when I ran my 17in welds with 35in. BFG M/T's it wasn't nearly as pronounced
__________________ John
05' Dmax LLY CC SB, 6in. Fabtech with Heavy duty tie rods,
35in. MICKEY ATZ's, 20in. KMC's,
6000K HID headlights & fogs,
PPE Hot Xcelerator, 4in straight exhaust, Afe stage II intake,
PPE boost controller, aeroforce scan gauge
Killerbee Compressor Mouthpiece, PCV re-route
06' Pontiac GTO 6.0L (Bone Stock)  | 
Linear Mode
