LMM EGR delete help!!!! - Chevy and GMC Duramax Diesel Forum
07.5-2010 LMM Performance Parts Discussion Discussion of Performance Parts For the 07 and up LMM Duramax Trucks No Advertising

DuramaxForum.com is the premier Chevy and GMC Duramax Diesel Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 09-16-2011, 07:25 PM   eBay Motors  #1 (permalink)
DuramaxForum n00b
 
RustyNutz's Avatar
 
Join Date: Dec 2010
Location: Vernal Utah
Posts: 24
Exclamation LMM EGR delete help!!!!

does anyone have any pics of there egr blocker plate installed they could post? Been workin on mine for bout 9 hours now and still not satisfied.. got it all together once and put load on the engine and it leaks. tore back apart now ... all help appreciated
__________________
2008 2500HD 32K miles
4" Tuff country EZ ride lift
20" XD Badlands 33-12.50-20 Toyo's
Banks Cold Air Intake
Airdog II 165
Edge Insight CTS with turbo timer
Magnaflow 4" turbo back
EFI Live
RustyNutz is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 09-16-2011, 08:04 PM   eBay Motors  #2 (permalink)
Senior Member
 
booxr's Avatar
 
Join Date: Apr 2009
Location: Central Michigan
Posts: 421
I don't have any pics but I had the same issue. You did use the stock metal gasket right? I put some perma seal on the plate let it get tacky put the gasket on the plate and put some more on the back side of the gasket that will be contacting the up pipe. Then reinstalled, let sit for a few minutes maybe 10 and was good to go. Hope this helps. I know how you are feeling right now it sucks
__________________
2008 LMM CC/SB LT2
Tuned by Kory Willis - Pro Fab EGR delete tube
3" drop shackles - 4" SS MagnaFlow
20'' Monsters 285/50R20 Cooper Zeon ltz
booxr is offline   Reply With Quote Quick reply to this message
Old 09-16-2011, 09:34 PM   eBay Motors  #3 (permalink)
RON PAUL 2012
Lifetime Supporting Member
 
HumboldtDmax's Avatar
 
Join Date: Jan 2009
Location: California
Posts: 3,067
make sure its all the way in there( the bottom of the plate hangs up), shouldnt be anything hanging out but the tab and tighten the crap out of it

its common for the egr to leak on your first go at it, LMM's are a bitch
__________________
7.5 LMM CHEVY CC LT Z71
FabFour bumpers, Rancho 4in w/Bilstiens, HD tie rods and braces,35x12.5 Toyo MT on 20x10x4.5BS KMC Monsters
[BANKS intake,dual exhaust,intercooler]Diamond Eye down pipe, AFE tube, res. plug, PCV mod
4094avnt, 60% over nozzles, PPE race valve & fuel pickup, AirDog 150, Fitch fuel catalyst
Inglewood SCIV w/1056 C3 oiler, EFI live, Duramaxtuner DSP 5, Edge Insight
ProFab manifold/up pipes & 3" short bridge/boost pipe
HumboldtDmax is offline   Reply With Quote Quick reply to this message
Old 09-16-2011, 09:37 PM   eBay Motors  #4 (permalink)
DuramaxForum Fanatic
 
mackyoudip's Avatar
 
Join Date: Nov 2009
Posts: 6,220
Another reason to remove it completely!
__________________
Mack: 2014 GMC Sierra gas 5.3
Previous owner of many duramax's fast and slow.
mackyoudip is offline   Reply With Quote Quick reply to this message
Old 09-16-2011, 10:44 PM   eBay Motors  #5 (permalink)
DuramaxForum n00b
 
RustyNutz's Avatar
 
Join Date: Dec 2010
Location: Vernal Utah
Posts: 24
finally got it ... yeah lmm's are a pain in the ass to work on ... and like u said i had alot of problem with the bottom of the plate hanging up .... thanks guys
__________________
2008 2500HD 32K miles
4" Tuff country EZ ride lift
20" XD Badlands 33-12.50-20 Toyo's
Banks Cold Air Intake
Airdog II 165
Edge Insight CTS with turbo timer
Magnaflow 4" turbo back
EFI Live
RustyNutz is offline   Reply With Quote Quick reply to this message
Old 09-17-2011, 02:34 AM   eBay Motors  #6 (permalink)
Junior Member
 
KC2GIW's Avatar
 
Join Date: Dec 2010
Location: Syracuse, NY
Posts: 156
Now do youuuuuuu have any pictures???


Also...I hear it helps to trim the ends off the outer tabs as there only to locate it. True or false?
__________________
2007.5 GMC 2500 HD. XC/SB. Edge CTS, MBRP 5", leveled.
2002 Z06. 520/500 hp/tq @ wheels.
2009 VRSC DX. Screamin' Eagle "race" cams, Dyno tuned, TAB exhaust, etc. 130 hp @ wheel.
2007 F8 Sno Pro. Now in 1000 tiny little pieces in the woods. That was fun.


facebook.com/matthew.antonio
KC2GIW is offline   Reply With Quote Quick reply to this message
Old 09-17-2011, 04:25 AM   eBay Motors  #7 (permalink)
DuramaxForum Enthusiast
 
WishforaDMax's Avatar
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 2,056
damn glad i have a lly mine literally took 2 minutes and didnt leak one bit
__________________
Names Yezin im 24 and yes i bought my truck myself
2006 CCSB 2500Hd Lt2 LLY DMax, Efi live 150hp Idaho Rob , 5in Straight Pipe 6in Black Tip:rockin, Diamond Eye Dp, Tie rod sleeves, Edge Insight cts, SDP Egr Delete Pipe, Fprv shimmed, Pcv Reroute, All On mod, Blue led's in gauges cluster, Clarion Nx700, 8000k HID's highs/lows/fogs, Rbp Locking Fuel Door, Recons with Led Reverse lights
Name is Sharks06LLY on Duramaxdiesels.com

WishforaDMax is offline   Reply With Quote Quick reply to this message
Old 09-17-2011, 09:08 AM   eBay Motors  #8 (permalink)
RON PAUL 2012
Lifetime Supporting Member
 
HumboldtDmax's Avatar
 
Join Date: Jan 2009
Location: California
Posts: 3,067
Quote:
Originally Posted by KC2GIW View Post
Now do youuuuuuu have any pictures???


Also...I hear it helps to trim the ends off the outer tabs as there only to locate it. True or false?
yes opening up the slots helps because it doesnt just slide into place, there is a rounded edge in the way so you have to open it up about an inch to weasel the plate in there

not going to be easy getting pics on an LMM
__________________
7.5 LMM CHEVY CC LT Z71
FabFour bumpers, Rancho 4in w/Bilstiens, HD tie rods and braces,35x12.5 Toyo MT on 20x10x4.5BS KMC Monsters
[BANKS intake,dual exhaust,intercooler]Diamond Eye down pipe, AFE tube, res. plug, PCV mod
4094avnt, 60% over nozzles, PPE race valve & fuel pickup, AirDog 150, Fitch fuel catalyst
Inglewood SCIV w/1056 C3 oiler, EFI live, Duramaxtuner DSP 5, Edge Insight
ProFab manifold/up pipes & 3" short bridge/boost pipe
HumboldtDmax is offline   Reply With Quote Quick reply to this message
Old 09-17-2011, 09:12 AM   eBay Motors  #9 (permalink)
DuramaxForum n00b
 
RustyNutz's Avatar
 
Join Date: Dec 2010
Location: Vernal Utah
Posts: 24
i was so irritated by the time i got done i didnt even think about taking a pic ... i did trim the very outside of the ears that slide around the bolt off so that i could keep my screw drivers in there prying while i weaseled it in
__________________
2008 2500HD 32K miles
4" Tuff country EZ ride lift
20" XD Badlands 33-12.50-20 Toyo's
Banks Cold Air Intake
Airdog II 165
Edge Insight CTS with turbo timer
Magnaflow 4" turbo back
EFI Live
RustyNutz is offline   Reply With Quote Quick reply to this message
Old 09-17-2011, 09:46 AM   eBay Motors  #10 (permalink)
DuramaxForum Fanatic
 
mackyoudip's Avatar
 
Join Date: Nov 2009
Posts: 6,220
Quote:
Originally Posted by RustyNutz View Post
i was so irritated by the time i got done i didnt even think about taking a pic ... i did trim the very outside of the ears that slide around the bolt off so that i could keep my screw drivers in there prying while i weaseled it in
Lmm = the most irritating engine ever made.
__________________
Mack: 2014 GMC Sierra gas 5.3
Previous owner of many duramax's fast and slow.
mackyoudip is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply


Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Chevy and GMC Duramax Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 12:56 AM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.

Search Engine Friendly URLs by vBSEO 3.3.2