has anyone ever twisted their drive line in half like a cork skrew? i did last week backing over a parking block. was mine just weak or is this a common problem?
thanks
__________________ 2002 3500HD SUNCOAST STAGE 5 TRANNY, PPE HOT TUNE 2+ET, CUSTOM VAN AIKEN BOX WITH NO TIMING ADDED, AURORA 5000 TURBO, INJECTORS, FASS FUEL, 4" MAGNAFLOW EXHAUST, PPE BOOST VALVE, BANKS BID HEAD WASTE GATE, COGNITO TIE RODS, FABTECH 8 INCH LIFT, 20" PANTHER WHEELS, 35" PRO COMP AT'S
I heard of people twisting them when pulling but not by backing over something. However, there hollow inside so I can see them crushing.
__________________ Jason 2006 Silverado 2500HD LBZ CC SB Escalade Handles, Front windows tinted to match the rear, painted bumpers, billet grille 4 Kicker 10in Subs in 2 custom box's, Autometer Ultra lite II Pyro and Boost gauges MBRP Turbo Back Stainless Exhaust (Straight piped), w/ stainless tip! PPE Hot+2 285/75/16 Nitto Terra Grapplers on Gear Alloy wheels ****Lost Kitty Reward if found!! 1999 Ford F-550 PowerStroke ''Wrecker'' **Jerrdan bed, S&B Intake
yeah i was just going over a parking block at the grocery store not getting on it or anything. really a wierd deal! i was kinda surprised to see the inside is full of foam.
__________________ 2002 3500HD SUNCOAST STAGE 5 TRANNY, PPE HOT TUNE 2+ET, CUSTOM VAN AIKEN BOX WITH NO TIMING ADDED, AURORA 5000 TURBO, INJECTORS, FASS FUEL, 4" MAGNAFLOW EXHAUST, PPE BOOST VALVE, BANKS BID HEAD WASTE GATE, COGNITO TIE RODS, FABTECH 8 INCH LIFT, 20" PANTHER WHEELS, 35" PRO COMP AT'S
HMMMM??Just heard of that when someone was power braking/beating on..Anyhow I have a cc truck,it has an aluminum driveshaft,it is a Spicer,[one piece],is this a factory item?Not that I'm complaining or nothingDid maybe the previous owner add it,I git it w25,000 miles on it,anybody else have this too??
__________________ 2006 GMC 2500HD 4x4{cc,sb,SLE} 90/175hp tune,nocat/muff!Naked pic of wife hanging from the rear view.
Goodies waiting for installation!!LBZpowered!!
2002 GMC 1500 [2wd]5.3 power{98k}20 in wheels on!!!LOOK AT AVATAR<<<<
1987 Monte Carlo SS all orig!!89k.....
1978 Malibu [2 dr!!]too far in the $$$ to ever think of selling..[ZZ4 from GMPP coming in March!!] HOT SHOT RIG:2002 GMC Yukon XL***312,674 miles***Hytech tuned,K&N cai[not my choice]...Runs like a whore in church...The left lane was meant to pass,move over or we'll run over your assss!!!P.H.inc. Hot shot 7080let he who touch dis sig die...
My ram is a quadcab and it has a 2-piece driveshaft. I thought only the regular cabs got a one-piece shaft???
Me too,I do have a crew cab and I was/have been puzzled by this,if no one's ever heard of it I can write the part # down and tomorrow gat a picture posted.But it is a one piece,that is what's got me guessing tooIt is a Spicer,and I know it's aluminum cause a magnet will not stick..I have only seen crews and excabs with hanger/center alignment carrier or bearing,people call em by different names,ya get the idea,neber seen a cc or xcab with a 1 piece...
__________________ 2006 GMC 2500HD 4x4{cc,sb,SLE} 90/175hp tune,nocat/muff!Naked pic of wife hanging from the rear view.
Goodies waiting for installation!!LBZpowered!!
2002 GMC 1500 [2wd]5.3 power{98k}20 in wheels on!!!LOOK AT AVATAR<<<<
1987 Monte Carlo SS all orig!!89k.....
1978 Malibu [2 dr!!]too far in the $$$ to ever think of selling..[ZZ4 from GMPP coming in March!!] HOT SHOT RIG:2002 GMC Yukon XL***312,674 miles***Hytech tuned,K&N cai[not my choice]...Runs like a whore in church...The left lane was meant to pass,move over or we'll run over your assss!!!P.H.inc. Hot shot 7080let he who touch dis sig die...
Last edited by daddysLBZ : 06-10-2008 at 10:56 PM.
Reason: missed
The factory drivelines on these pickups are, for the most part, pretty tough. However, one little dent, and quite a bit of the torsional strength of it is lost. Rather than the torque being evenly distributed over the entire shaft, it ends up with a high stress area that will lead to failure, relatively easily. IMO odds are there was a small dent on it that you probably didnt even know about, and that led to the failure.
__________________ 2001 Club Cab 2500HD 4x4 D/A
Banks 6 Gun with speed loader, Diablosport Predator for speedo correction, PPE boost valve, PPE lift pump (soon to be installed), Grille guard, Moon visor, Leveling kit, 285-75-16 A/T TA's, Grand Rock stacks, spray in bed liner
1993 Z28 M6
Lloyd Elliot ported heads and intake, LE 1.6 cam, 1.6 RR, 52MM BBK TB, 30lb/hr injectors, PCMforless tune, K&N FIPK, Pacesetter longtubes, Pacesetter ORY, Magnaflow catback -the cat Dynaspark billet optispark, RAM kevlar clutch, 275-45-17 pirellis on 17x9.5 ZR1's up front, 315-35-17 on 17x11 ZR1 rears
I believe the one piece driveline was a GM fix for a low speed acceleration shudder experienced on some CC pickups.
__________________ 2001 Club Cab 2500HD 4x4 D/A
Banks 6 Gun with speed loader, Diablosport Predator for speedo correction, PPE boost valve, PPE lift pump (soon to be installed), Grille guard, Moon visor, Leveling kit, 285-75-16 A/T TA's, Grand Rock stacks, spray in bed liner
1993 Z28 M6
Lloyd Elliot ported heads and intake, LE 1.6 cam, 1.6 RR, 52MM BBK TB, 30lb/hr injectors, PCMforless tune, K&N FIPK, Pacesetter longtubes, Pacesetter ORY, Magnaflow catback -the cat Dynaspark billet optispark, RAM kevlar clutch, 275-45-17 pirellis on 17x9.5 ZR1's up front, 315-35-17 on 17x11 ZR1 rears
I believe the one piece driveline was a GM fix for a low speed acceleration shudder experienced on some CC pickups.
OK just never heard of??
__________________ 2006 GMC 2500HD 4x4{cc,sb,SLE} 90/175hp tune,nocat/muff!Naked pic of wife hanging from the rear view.
Goodies waiting for installation!!LBZpowered!!
2002 GMC 1500 [2wd]5.3 power{98k}20 in wheels on!!!LOOK AT AVATAR<<<<
1987 Monte Carlo SS all orig!!89k.....
1978 Malibu [2 dr!!]too far in the $$$ to ever think of selling..[ZZ4 from GMPP coming in March!!] HOT SHOT RIG:2002 GMC Yukon XL***312,674 miles***Hytech tuned,K&N cai[not my choice]...Runs like a whore in church...The left lane was meant to pass,move over or we'll run over your assss!!!P.H.inc. Hot shot 7080let he who touch dis sig die...
I actually just heard of it the other day. I found it in my random internet surfing. I am currently deployed to Kyrgistan, and its pretty boring here, so my wandering on the net kind of goes all over. lol
__________________ 2001 Club Cab 2500HD 4x4 D/A
Banks 6 Gun with speed loader, Diablosport Predator for speedo correction, PPE boost valve, PPE lift pump (soon to be installed), Grille guard, Moon visor, Leveling kit, 285-75-16 A/T TA's, Grand Rock stacks, spray in bed liner
1993 Z28 M6
Lloyd Elliot ported heads and intake, LE 1.6 cam, 1.6 RR, 52MM BBK TB, 30lb/hr injectors, PCMforless tune, K&N FIPK, Pacesetter longtubes, Pacesetter ORY, Magnaflow catback -the cat Dynaspark billet optispark, RAM kevlar clutch, 275-45-17 pirellis on 17x9.5 ZR1's up front, 315-35-17 on 17x11 ZR1 rears
I actually just heard of it the other day. I found it in my random internet surfing. I am currently deployed to Kyrgistan, and its pretty boring here, so my wandering on the net kind of goes all over. lol
All good then,best to ya out there,thanks 4 ya service Thanks for the info!!
__________________ 2006 GMC 2500HD 4x4{cc,sb,SLE} 90/175hp tune,nocat/muff!Naked pic of wife hanging from the rear view.
Goodies waiting for installation!!LBZpowered!!
2002 GMC 1500 [2wd]5.3 power{98k}20 in wheels on!!!LOOK AT AVATAR<<<<
1987 Monte Carlo SS all orig!!89k.....
1978 Malibu [2 dr!!]too far in the $$$ to ever think of selling..[ZZ4 from GMPP coming in March!!] HOT SHOT RIG:2002 GMC Yukon XL***312,674 miles***Hytech tuned,K&N cai[not my choice]...Runs like a whore in church...The left lane was meant to pass,move over or we'll run over your assss!!!P.H.inc. Hot shot 7080let he who touch dis sig die...
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.