315/75/16 on a 07.5 new body style

Fish · 08-28-2007, 07:10 AM

What do you guys think ? I'm putting on a leveling kit and rim spacers. I need feed back can I do it without too much rubbing ?

Thanks Fsih

**TYREBOYZ_DEMAXIN** · 08-28-2007, 09:33 AM

you will need to do some cutting on the inner fender to make it work but if you do a 2in lift everything clears..

Fish · 08-28-2007, 12:45 PM

Thanks but where on the fender back near the door or the bumper ? Will it clear everthing lock to lock

**TYREBOYZ_DEMAXIN** · 08-29-2007, 04:59 AM

also if you run mudflaps they will rub on there also one of the only almost stock 3/4ton GM trucks that i put 315's was a 04 GMC and all he did was the leveling kit and had the bumper mover forward a 1/2 in. and everything worked great on it,all the others had atleast 2in. lifts....

diesel bombers · 01-02-2008, 05:50 PM

Have you done this mod yet? I am betting it is not going to clear. I have 35's with an 8" and it rubs.

blackcloud · 01-11-2008, 07:03 PM

the tires will fit but with the spacers it might rub when u turn a 315/60/16 is 31.5 inch tall and almost 13 inchs wide you may have to trim the plastic inner fender well for turning clearance with the spacers

6speedduramax · 01-11-2008, 08:09 PM

I have 315-75-16 on stock wheels and the fit fine. All I have is the torsion bars cranked way up and the bottom part of the plastic part of the bumper cut a little. Rubs a little on full lock but thats about it.

2008_WHITE_DURAMAX · 03-30-2008, 07:15 PM

"the tires will fit but with the spacers it might rub when u turn a 315/60/16 is 31.5 inch tall and almost 13 inchs wide you may have to trim the plastic inner fender well for turning clearance with the spacers"

I THINK HE IS TALKING ABOUT A 315/75r16 THIS IS A 34.6" TALL TIRE THAT WILL FIT WITH A SET OF KEYWAYS AND A LITTLE CUTTING

blackdeath · 03-30-2008, 07:46 PM

i got 35" with a 6"lift and they rub

Nor-Cal Nick · 03-31-2008, 09:03 AM

If you are trying to put 315/75r16's on a new body with after market wheels it's not going to fit. If you are going to use a factory wheel it might be possible but you will have your front suspension so far turned up it will ride like crap(top out) and you will need to do a very large amount of trimming. Some guys will do it but after buying a 50k truck I just can't see putting 15lbs. in a 10lbs sack.

Nor-Cal Nick