2007.5 + (GMT 900) Non Powertrain--New Body Style--Discussion 07.5 + Topics Not related to the Powertrain, interior, suspensions, body, wheels, tires, ect.
My truck has 6500 miles and has started this load popping noise that sounds like a ball joint popping. It happens when pulling out of my garage or parking in a parking space. Please tell me someone knows how to fix this. I took it to the dealer yesterday and they told me that is was the steering stops and they greased them. I knew that wasn't it but anyway. Help please, driving me crazy.
Its either 1 of 2 things. There is another post on here with this and I am having the same problem. Either the intermediate shaft is bad which is somewhat common. If your steering wheel pops or you feel it in the wheel its probably the shaft. I have had mine changed 3 x
Another area is your body mounts for the cab. Mine apparently are bad due to loose bolts also. Dealer says they aint covered by warranty but I say Nay Nay..
Check for bolt tightness bc some trucks were made on Friday at 4:55 pm almost beer oclock and sometimes ppl forget to tighten them bolts up...
Hope this helps
__________________
2007.5 Chevy 3500 CC Dually LTZ No Mods for now
265/ 75 / 16 TOYO MT on 16" Alcoas with 2" wheel spacers by Fred.
2000 Peterbilt 379 EX 3406E Cat 15spd Wet Kit
Clement End Dump Barrel Bed
2004 Komatsu PC 138 US-LC2 with hyd thumb and JRB quik tach and grade blade Loaded Cab
2006 Tacheuchi TB145 with thumb Loaded Cab
2006 John Deere CT332 Compact Track Loader with quicktach, 2 spd and Loaded Cab
2006 Chev 6.0L/4L80e 3500WT DRW Ex-Cab, 9 'Flat/GN, Ride-Rite Air, Sulastics, Bilsteins, A/T Revos, TTT towing mirrors. Use-ta Haves 2005-LLY 3500 LS DRW Crew Cab, 2002-LB7 3500 LS DRW Crew Cab
. . . . . . . . . . . I Live my life in such a way that when my feet hit the floor in the morning...Satan shudders & says "Oh shit, he's awake!"
Im not sure but id say just put a good tightening on it or use a impact on a lower setting.
__________________
2007.5 Chevy 3500 CC Dually LTZ No Mods for now
265/ 75 / 16 TOYO MT on 16" Alcoas with 2" wheel spacers by Fred.
2000 Peterbilt 379 EX 3406E Cat 15spd Wet Kit
Clement End Dump Barrel Bed
2004 Komatsu PC 138 US-LC2 with hyd thumb and JRB quik tach and grade blade Loaded Cab
2006 Tacheuchi TB145 with thumb Loaded Cab
2006 John Deere CT332 Compact Track Loader with quicktach, 2 spd and Loaded Cab
My tech brought my 08 Dually in to go over before a trip I just made this past weekend and found the 2 front rad. support body mounts almost 2 full turns loose and the front cab mounts about 1 turn. The rest where not all that loose. I can't remember what he torqed them to, sorry. There is alot of talk about body mounts failing on another forum. There is a TSB out for it from what I read.
My truck makes the same noise here for a few months. I have checked for hub problems, tie rods being strange, loose sway bar....nothing. I will have to check this out and report back...
__________________ 2006 2500 LBZ CREW CAB LONG BED * NFAB STEP BARS
35" TOYO OC MT"S W/ 18" ROCKSTARS * FABTECH 6" LIFT * FABTECH HD TIE RODS
BD FULL BORE MANIFOLD * S&B CAI
4" STRAIGHT PIPE EXHAUST * MBRP 5" TIP
TRANSGO JR 4/11/09...THIS WAS A GREAT MOD!!!
BANKS INTERCOOLER * RESONATOR HOLE PLUGGED
EGR BLOCKER PLATE * EDGE INSIGHT MONITOR TUNED WITH EFI LIVE>>>NOTICE I AM SMILING!!!! www.performancetruckproducts.com www.huskerdiesel.com
Someone else on here did mention having to have either their body bushings or bolts replaced. That would be a good place to start.
__________________ 2008 GMC 2500HD SLE. Black, extended cab short bed.Only mod is a B&W turn over nall goose neck hitch at this time. That is subject to some serious change.
Well my mechanic came back to work today, and we put it on the rack and found that the 4 bolts in the crossmember under the oilpan seemed to be loose. We turned them with a lon pul handle and they would make the popping noise. They must have some sort of shoulder lock that make the noise at the bolt head turns past it. Anyway, we pulled them out and reversed the way they were installed, greased them and tightened the crap out of them. I have not heard it again. I hope this fixed it.
Damn I thought I was the only one with this problem. It sounds like something is binding and a nice pop noise.
I also took it to my dealership and they gave the truck back to me and said nothing was wrong. "It must be your drive way..." This happens when I turn my steering wheel all the way to the right.
Can non dealership fix warranty issues??
__________________ 2008 Chevy Silverado 2500 HD Duramax
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.