2007.5 + (GMT 900) Non Powertrain--New Body Style--Discussion 07.5 + Topics Not related to the Powertrain, interior, suspensions, body, wheels, tires, ect.
I am getting a popping noise when turning left. Does anyone have any idea what this might be or experiencing it yourself?
Checked if the intermediate shaft has been greased??
__________________ 2006 GMC 2500HD 4x4{cc,sb,SLE} 90/175hp tune,nocat/muff!Naked pic of wife hanging from the rear view.
Goodies waiting for installation!!LBZpowered!!
2002 GMC 1500 [2wd]5.3 power{98k}20 in wheels on!!!LOOK AT AVATAR<<<<
1987 Monte Carlo SS all orig!!89k.....
1978 Malibu [2 dr!!]too far in the $$$ to ever think of selling..[ZZ4 from GMPP coming in March!!] HOT SHOT RIG:2002 GMC Yukon XL***312,674 miles***Hytech tuned,K&N cai[not my choice]...Runs like a whore in church...The left lane was meant to pass,move over or we'll run over your assss!!!P.H.inc. Hot shot 7080let he who touch dis sig die...
fill out your sig. do you have nerf bars that can cause it if they were not installed evenly. I had a problem like that and that is what it turned out to be.
__________________ Four stroke diesel S.S.B.B. Suck Squeez Bang Blow
06 LBZ with 5 inch magnaflow exhaust,Bd exhaust manifold, Bully dog outlook, Egr blocker, Firestone air bag system,Custom sound system, dual fuel filters,leveling kit, B&M deep tranny pan,TTS lift pump,Turbo Resonator plugged,Cooper ST 265/75R16, Bully nerf bars and B&W guardian headache rack sprayed with reflex bed liner, B&W turn over ball,B&W Tow&Stow, transgo jr, efi live, tranny filled with transynd Omaha Truck and Trailer offering Woodworth custom build trailers. Now a factory authorized Whelen dealer
My iron is yellow
I would say wheel bearings as well. seems to happen on trucks more often than cars. That or could it be a ball joint? Anyone know of a bad ball joint making that sound?
I have to say I was real pleased when I bought my new tires Saturday,the shop let me go inside and check hubs,brake pads,etc.[Everything looks good,hubs,pads,ball joints,54k and counting..] While they had it on the lift.If you ask real nice,they should have no problem letting you check it.I was able to check over mine with a flashlight as the tire guy mounted my tires..
__________________ 2006 GMC 2500HD 4x4{cc,sb,SLE} 90/175hp tune,nocat/muff!Naked pic of wife hanging from the rear view.
Goodies waiting for installation!!LBZpowered!!
2002 GMC 1500 [2wd]5.3 power{98k}20 in wheels on!!!LOOK AT AVATAR<<<<
1987 Monte Carlo SS all orig!!89k.....
1978 Malibu [2 dr!!]too far in the $$$ to ever think of selling..[ZZ4 from GMPP coming in March!!] HOT SHOT RIG:2002 GMC Yukon XL***312,674 miles***Hytech tuned,K&N cai[not my choice]...Runs like a whore in church...The left lane was meant to pass,move over or we'll run over your assss!!!P.H.inc. Hot shot 7080let he who touch dis sig die...
I have the same noise. Mine has 9K miles. I mentioned it to the dealer but They have been unable to fine the problem(I doubt if they could find a anything if there wasn't a TSB on it). Ive had my truck to the dealer 3 times since new and every time had work done half a$$ed.
Anyway I am curious as to what it might be.
__________________ '07 GMC Seirra CC 4X4 Duramax/Allison
check shaft condition and age/probly needs attention
The steering intermediate shaft is often overlooked or neglected.I am not saying that's it for sure,but it is where I'd look first..
__________________ 2006 GMC 2500HD 4x4{cc,sb,SLE} 90/175hp tune,nocat/muff!Naked pic of wife hanging from the rear view.
Goodies waiting for installation!!LBZpowered!!
2002 GMC 1500 [2wd]5.3 power{98k}20 in wheels on!!!LOOK AT AVATAR<<<<
1987 Monte Carlo SS all orig!!89k.....
1978 Malibu [2 dr!!]too far in the $$$ to ever think of selling..[ZZ4 from GMPP coming in March!!] HOT SHOT RIG:2002 GMC Yukon XL***312,674 miles***Hytech tuned,K&N cai[not my choice]...Runs like a whore in church...The left lane was meant to pass,move over or we'll run over your assss!!!P.H.inc. Hot shot 7080let he who touch dis sig die...
My truck is a 07.5 LMM bone stock. Not a single modification. No nerf bars or anything. I only have 12000 miles on the truck and it has been doing this for the last 1000 miles. I am afraid this is going to be another issue that the dealer is unable to fix. I have also had the starter grinding sometimes when I turn over the truck. I have been to two different dealers on that issue and no luck. They tell me that it needs to happen at the dealer so that they can identify the problem. I believe when that is the case, it will be when it is towed in because it won't turn over!
My truck is a 07.5 LMM bone stock. Not a single modification. No nerf bars or anything. I only have 12000 miles on the truck and it has been doing this for the last 1000 miles. I am afraid this is going to be another issue that the dealer is unable to fix. I have also had the starter grinding sometimes when I turn over the truck. I have been to two different dealers on that issue and no luck. They tell me that it needs to happen at the dealer so that they can identify the problem. I believe when that is the case, it will be when it is towed in because it won't turn over!
I've had the same problem with the starter grinding and not engaging. It only does it once in a while and never when I take it to the dealer. They said that if they can't witness the problem they won't pursue it. I have no faith in the dealers ability to do anything right on my truck.
__________________ '07 GMC Seirra CC 4X4 Duramax/Allison
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.