[Hondarider552]

Ive learned from another forum that the LBZ van Y bridges are somewhat like the lb7 intakes, nice and un-restricted.

LBZ's have the intake heater, egr assembly.
Since Im in AZ I have no reason for the intake heater, as I already have a spacer from Mike.

My plan is to buy a van LBZ intake Y bridge for like $140, cut the top off of it since it is a flandge style, and weld 3" aluminum tube to it exactly like the lb7 cold side intakes.

Updates to follow.

This not only smoothes out flow to the intake manifolds, but gets rid of the intake heater and is a option to remove the egr assembly.
The van unit is 140 bucks and PPE sells it for over 600.
Im going to have a friend weld it up for me, and hope it is cheaper.