Chevy and GMC Duramax Diesel Forum - View Single Post

**05_LLY** · 11-23-2006, 07:50 AM

I went with Isspro EV series gauges, YOu really dont need a fuel psi as it will read negative untill you put a lift pump on. You dont have to remove the exhaust manifold i installed my gauges in about two hours here at home! YOu might have to remove the upper intake depending on how hidden you want the fitting and hose for the boost gauge but its not hard at all. I removed mine and you really have to look to see where its at

!

Hope this helps
Caleb

11-23-2006, 07:50 AM	eBay Motors #2 (permalink)
05_LLY Gear Jammer... Join Date: May 2006 Location: Mt. Pleasant PA Posts: 2,021	I went with Isspro EV series gauges, YOu really dont need a fuel psi as it will read negative untill you put a lift pump on. You dont have to remove the exhaust manifold i installed my gauges in about two hours here at home! YOu might have to remove the upper intake depending on how hidden you want the fitting and hose for the boost gauge but its not hard at all. I removed mine and you really have to look to see where its at ! Hope this helps Caleb __________________ Caleb "This is a full-blown, four-alarm holiday emergency here. We're gonna press on, and we're gonna have the hap, hap, happiest Christmas since Bing Crosby tap-danced with Danny f'n Kaye. And when Santa squeezes his fat white @$$ down that chimney , he's gonna find the jolliest bunch of @$$holes this side of the nuthouse"--Chevy Chase