[Patches4]

Here is a look at what the WVO looks like when I first get it and in the jug on the right, what filtered WVO looks likepump 018.JPG

This is what the mixing system looks likepump 016.JPG

This is the transfer systempump 011.JPG

This is the Delivery systempump 012.JPG

Basically I use the transfer system to pump the WVO out of the jugs and into holding tanks (not shown). When it is time to make a patch, I used the transfer system to pump the WVO from the holding tank to the mixing system. Then I use the transfer system to pump the HHO from its holding tank and into the mixing system which is now pumping and mixing the fuels. Then I add the RUG to the mix and the fuel additive. Then the mix is pumped from the mixing station through a filter and into the delivery system. Then when needed, the delivery system pumps the WVO (already filtered once) through two more filters and into the vehicle. Hope this sheds some light on the set-up!