Quote:
Originally Posted by Killerbee  You have to buy more than a mouthpiece. This seems to be frequently overlooked. There is no way you can cover the ground you need to in 30 minutes, or even several hours. There is machining involved for fitment, a method of coupling to consider...shopping...material compatability (rubber is not acceptable), etc.
Then again, maybe I am overlooking something. When I developed the IOH kit, it was anything but an easy process. Some of the recent trouble posts are proving that for me now. |
I haven't seen any posts where it would take several hours to replace the stock MP. If it does you most likely went to see a double feature at your local theatre. StonewallMP5 where are you located? If your in SoCal buy the stock LBZ MP and I will install it on your truck within 30 minutes....again this is not a major modification. It might take a few minutes longer to get your intake measured/cut, but before I did my modification I was prepared. From reading all the posts regarding this Mod I knew that you had to grind down a ridge on the LBZ MP. This was accomplished in a few minutes with my $9.00 Harbor Freight grinder. I used the same information regarding cutting my intake, and had if marked and once I removed it I was able to make a straight cut with a Miter Saw. Luckily I had a silicone sleeve available so my installation maybe when a bit quicker than others, but it's really a very simple install....