| Pull the molding off around it and take 2 screws out of the bracket that holds the stock radio. You may have to pull it a little to get it off the pins. the wire harness might need to be pulled through. It may seem that you are pulling against the wire harness...You probably are. You might need to pull the HVAC controls and feed the wires so you have slack.
__________________ 2004 GMC 2500HD D/A CC Carbon Metallic w/ LB7
4" turbo back MBRP exhaust, Cognito UCAs & HD tierods
TST Powermax Programmer, Diablosport Predator
285/75-16 BFG T/A KOs, Eagle Alloys Series 187
Clifford 2 way remote start, High Idle, Bilstein 5100s, 1.5" lift blocks
AFE Magnum Force Stage 2 Proguard 7 intake
Racor 2 Micron pre-OEM with heater & water sep. Waiting install:Rancho Steering stabilizer....all thanks to NorCal Truck  Support your Supporting Vendors |