View Single Post
Old 07-21-2008, 07:09 PM   eBay Motors   #9 (permalink)
Redneck17
Member
Points: 464, Level: 7
Points: 464, Level: 7 Points: 464, Level: 7 Points: 464, Level: 7
Activity: 0%
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Apr 2008
Location: Dundalk, MD
Posts: 46
Quote:
Originally Posted by DuramaxOnTheBrain View Post
Its not too bad once you start taking it apart. first pull the surround off of the front. Just pull it forward and it will start coming off (put the shift lever all the way to 1 and tilt the steering wheel all the way down) then pull it all the way out. It's a little tight but it will come out. Then you can get a better look down in. There should also be a metal plate under the steering wheel (about where your knees are) that will come off with a few screws and you can check out your main harness. Hope that helps a little. Go to crutchfield website and you can see how to take just about any dash apart...

Brain
Thanks for the info, looks like tomorrows job after I get off.

I guess I should take it apart, start it up, and do some wiggling?
__________________
2003 Chevy Duramax
Edge with Atiitude Chip
Volant Cold Air Intake
Silverline Exhaust

www.mdshooters.com

East Coast Rednecks
Redneck17 is offline   Reply With Quote