Quote:
Originally Posted by Blastmeister  My brother in law got me a kit (just bags, no compressor) in Salt Lake City for $250. I installed them in my garage in two hours with no special tools. On thing I did differently was to get a "T" fitting so both bags filled from one valve rather than the two that came with the kit. 2 years and no leaks. I run 70 - 75psi with the 5th wheel on, 5psi without. |
I run these in my truck as well. I actually installed these in my 04 gasser then swapped them into my 05 Duramax. I'm not sure on 07's but the classic and older is very easy to install. You just remove the bump stops and the bags bolt in it's place. The only drilling was for the air fittings. I installed two seperate fills. I have a large Lance slide in camper and needed sway control. With one fill valve air will shift from side to side. I guess with a fifth wheel being in the middle of the truck that wouldn't matter much? I run the same pressures as Blastmeister does. 5 psi w/o camper and 65-75 with my slide in camper. Put your fill valve in either the gas cap or like I did, In the drivers side wheel well. towards the front of the truck. 2 trucks and 4 years with no leaks. I don't have a compressor. I fill them at home or any gas station.