| If you are going to do another change, I would get a good quality engine flush. I use Amsoil's engine flush when converting motors over to syn. It helps thin the oil slightly and flush more of the junk out, and more of the old oil. That way you are starting fresh with clean internals. Either way, you are going to get alot of soot in the oil. About the only way to stop that is to install a bypass filter, which will remove a large amount of that soot, which is 1-4 microns in size. Most oil filters hit the 25 micron and up stuff.
__________________ We are very busy in the shop, please call for fastest service!
|