| tires rub after lift
Hi all!
I'm new here and need some help. I recently had a 2" lift and18" rims with 33" ProComp tires installed on my 05 2500HD. There was a little rubbing soon after, so I trimmed a little of the plastic off. That seemed to work until now(3 months later). It started rubbing again on the plastic and also the sway bar, but only on the drives side during sharp lefts. Is there a way to add more lift to fix the rubbing without removing the 2" lift? Can I have the 2" modified to a 4" or is it a completely different kit. Can I maybe crank up the torsion bars to cure this? I would bring it back to the original shop who obviously didn't check the clearance properly, but my work takes me all over western canada, so I'm no where near there.
Thanks in advance.
James |