Chevy and GMC Duramax Diesel Forum - View Single Post - H2 Hummer wheels fit with just spinning torsion bars?

Durallymax · 10-18-2008, 11:07 PM

If you run 285s minimal trimming and minimal cranking will be needed.

I ran 315s and put 9 turns in my bars and did a lot of banging trimming and zip tieing to mak them fit and they only rubbed at full clock or with a lot of suspension travel while turning.

As little as 1 turn in the t bars will goof up the alignment. I would make sure to get one. ESPECIALLY if you go with BFGs. A bad alignment will eat them up in under 1,000 miles.

10-18-2008, 11:07 PM	eBay Motors #5 (permalink)
Durallymax DuramaxForum Veteran Join Date: Mar 2008 Location: North of Madison, WI Posts: 2,519	If you run 285s minimal trimming and minimal cranking will be needed. I ran 315s and put 9 turns in my bars and did a lot of banging trimming and zip tieing to mak them fit and they only rubbed at full clock or with a lot of suspension travel while turning. As little as 1 turn in the t bars will goof up the alignment. I would make sure to get one. ESPECIALLY if you go with BFGs. A bad alignment will eat them up in under 1,000 miles. __________________ *The "Last Minute Puller"* '03 GMC 2500HD LB7/Allison EC/SB 4x4 Suncoast, EFI Live, S400, Studs, Stock Motor *Badger Truck Pullers Association Member* Thanks to all of my sponsors