|10-23-2012, 10:23 PM||eBay Motors #3 (permalink)|
Join Date: Nov 2011
Location: Lisbon, ND
I'm from nodak, workin at bobcat in gwinner now. But just took a job out in watford city
2004.5 lly GMC
5" diamond eye exhaust
Efi tuned by Idaho Rob
Suncoast stage V
Autometer pillar gauges
18x10 moto metal 962's 305/60/18 nitto terra grapplers
|10-24-2012, 10:40 PM||eBay Motors #4 (permalink)|
Join Date: Jun 2012
Haha usually just called the Dakota's! Ring a bell?! I'm up in bottineau right on the Canadian border. I farm up here. And smokedout who built your tranny? been getting ready to have mine sent out to be built. See if you knew anybody in nodak who's any good.
|11-10-2012, 11:19 PM||eBay Motors #5 (permalink)|
Join Date: Dec 2010
Going to Minot
02 CCLB 8" fabtech "lowered" on 35s Mods:
Sony speakers from Wal-Mart and some sweet mossy oak seat covers. Edge stacked with a Smarty stacked with another Smarty for the POWER!
Thanks to Rob/ Dustin http://www.atptrucks.com/ and Scott http://sdptwins.com/
JMAZ and the other guys on here, and my local shop in Greeneville TN Performance Auto Machine
11.7 116.9 on 37s
|11-29-2012, 05:39 PM||eBay Motors #6 (permalink)|
Join Date: Apr 2012
Location: Mooreton, ND
SE part of the state. Farm down here.
2009 GMC 2500 CC/SB SLE.
Interior:Weathertech floor liners, Autometer Cobalts, Tint, LED's.
Exterior:6 inch Zone, 315 Duratracs on H2's, AMP steps, Duraflaps, Bushwacker pockets, Linex, AVS visors, Delta toolbox, 100 gal. Transfer Tank, Recon LED cablights, Retrosolutions LED reverse lights, HID's, All-on mod.
Performance:EFI by Rob, MBRP 4 inch straight pipe, 6"x18" Rolled tip, Raptor 150, Traction Bars, S&B intake, Blocked, Plugged, Rerouted, Sleeved, Braced, Nicktane w/ Donaldson. Trans-go JR. and DE dp in the box awaiting install.
|11-29-2012, 07:38 PM||eBay Motors #8 (permalink)|
Join Date: Aug 2011
I'm in garrison
*08 ccsb* mods
EFI LIVE DSP5 tuned by Kory Willis
5" DE dumped, PPE race valve,PCVreroute,6k HID in lows and fogs,autometer boost and egt gauges
weather tech, AD165, congnito uca leveled with 18x9 fuel boost rims wrapped in 33x12.5 open county mt, SDP egr delete kit DE down pipe, recon cab lights, Rare parts tie rods, cognito braces, moog pitman/idler arm, edge cts,
|11-29-2012, 11:04 PM||eBay Motors #9 (permalink)|
Join Date: Jul 2012
Location: Riverton, WY
I live in Wyoming, but I work up here. In watford right now. Work out of Stanley, Minot, Watford and Killdeer areas usually.
2008 LMM CCLB 2500HD SLT
EFI Live by Rob. Stock, Heavy Tow, Econ 90, Street 120, Race 150. S&B Intake. 5" MBRP Straight pipe.
3" mbrp downpipe. Blocked, Rerouted, Plugged. Transgo Jr. Edge Insight CTS. And no tread.
My Build Thread