|11-20-2012, 02:34 PM||eBay Motors #1 (permalink)|
Join Date: Nov 2012
Oil leak, Rear main seal? Turbo? Oil Pan??
Whats up guys im new to the site just bought my LLY about 6 months ago, used the site quite a bit researching about duramax's before i bought mine.. love the truck, but i was changing the oil this past weekend and noticed a leak on the oil pan.. It drips off right below the drain bolt, but i noticed some on the tranny as well.. I tried to see if it was coming from above but it seems to be dry.. Is it possible it is just the drain plug and the wind is blowing it onto the tranny?? Let me know what you guys think or if there is something else i should look for, here are a few pics (after i wiped it of course so you wont see oil just residue).. thanks in advance guys
05 LLY 6 in lift, 35s
EFI live, 4in AFE intake to 4in straight pipe 6in tip, EGR delete, PCV reroute
|11-21-2012, 01:09 AM||eBay Motors #2 (permalink)|
Join Date: Oct 2006
Location: Irwin PA
Welcome to the forum!!
Man Im anal with my truck and I wouldnt worry about it. Id clean it off with a can of brake clean and keep a eye on it.
I notices mine was leaking when my truck had 8000 miles on it!!!
Also.. Nice truck
2006 Silverado 2500HD LBZ CC SB
Exterior: Escalade Handles, Front windows tinted to match the rear, painted bumpers & mirrors, billet grille, 305/50/20 Cooper Zeons on BMF Novakanes Death Metal, Cognito Braces, Stainless Sleeves, Train Horns
Interior: 4 Kicker 10in Subs in 2 custom box's, Autometer Ultra lite II Pyro and Boost gauges, Aeroforce Interceptor Gauge, HID Lows & Fogs, Painted accents
Performance: EFI Live Tuned by Blackout Performance, Custom Blackout Performance S475 over stock twins, 45 over stock injectors, MBRP Turbo Back Stainless Exhaust (Straight piped), Raptor Lift Pump, AFE Filter, GMAX6 kit with Suncoast 1057 converter installed by Blackout Performance
1999 Ford F-550 PowerStroke ''Wrecker'' **Jerrdan bed, S&B Intake
|11-21-2012, 03:34 AM||eBay Motors #3 (permalink)|
Join Date: Jan 2012
Mine dose the exact same thing when I bought it it was pretty built up so I cleaned it up real good and now I just wipe it down with a towel every oil change
Sent from my iPhone using AutoGuide.com App
White,06,LBZ,GMC,CC,SB,SLT,82,***miles,17"XD Misfits,305/70-17 Terra Grapps,Leveled Cognito Balljoint UCA's,Alpine deck,Kicker ZX500.1,2-10" Kicker ,PCV reroute,Res. plugged,5"MBRP straight,S&B intake,pipe,6"MBRPTip,Gutted magnaflow cat,AFE MP,EGR blocker, slipyolk,Edge CTS, TransGo Jr,Pro Fab Performance downpipe,AFE IC pipe,Nicktane/donaldson ,FPR plug,Mhale LB7 pistons, LMM rods, clevet bearings and ARP head studs,DS max flow exhaust manifold,new#6 injector,Drilled FRF, Pump rub fix, new trans cooler lines,PPE deep tranny pan,new#6 injector,the motor getting installed By Adams HRC Thanks to him Hes the best in town has saved me lots of $$