LED Light Bar's

Boreen · 12-09-2012, 06:04 PM

Lately i have been looking at them LED Light Bar's for the front of my truck. Wondering if anyone with an OBS GMC has put one between the tow hooks where that black plastic "grille" goes?
I measured it to be 22" wide and 2-1/4" high only.
Anyone make a Light bar to fit these dimensions?
I dont wanna pay the price for Rigid Industries so i'd rather look for a cheaper one.

Do these light bar's help with distance at all? or are they more of a flood lamp?

Thanks

Varty Yo · 12-09-2012, 06:33 PM

I have some 6" rigids im putting in the holes in the steel part of the bumper! Gonna try to get them in this week

Boreen · 12-09-2012, 09:30 PM

Post some pic's if you get it done.

Varty Yo · 12-09-2012, 09:32 PM

yah for sure! Had them since sept just havent found the time to pulling the grill apart to install them

12-09-2012, 06:04 PM	eBay Motors #1 (permalink)
Boreen DuramaxForum Enthusiast Join Date: Sep 2009 Location: Saskatchewan, Canada Posts: 3,017	LED Light Bar's Lately i have been looking at them LED Light Bar's for the front of my truck. Wondering if anyone with an OBS GMC has put one between the tow hooks where that black plastic "grille" goes? I measured it to be 22" wide and 2-1/4" high only. Anyone make a Light bar to fit these dimensions? I dont wanna pay the price for Rigid Industries so i'd rather look for a cheaper one. Do these light bar's help with distance at all? or are they more of a flood lamp? Thanks __________________ 2007 GMC LBZ CC/SB Zone, BDS, Rare Parts, Rancho, Cognito, Bilstien, Fox, Nitto, American Eagle, Tuff Country, Amp Research, AirDog, PPE, K&N, MBRP, Kenwood, Kicker, Sub Thump, US Speedo, WeatherTech Auto Meter, AeroForce, AVS, KC, TruxPort, Bushwacker, Alligator Performance, MA 1991 Camaro "C6" (Sunday Cruiser) LS3/T-56. Slammed and Cammed (Soon To Be Finished)

12-09-2012, 06:33 PM	eBay Motors #2 (permalink)
Varty Yo DuramaxForum Veteran Join Date: May 2011 Location: Regina, Sask! Posts: 1,310	I have some 6" rigids im putting in the holes in the steel part of the bumper! Gonna try to get them in this week __________________ 2006 LBZ Mike L Stage Awesome! Airdog2 165, 5" MBRP Turbo back EFI Live tuned by Idaho Rob, DSP5, ATP Cognito set at 8" Nor-cal Truck SS idler support/ Rare parts tie rods 37x13.50x20" toyo MT's/ XD Hoss wheels, Fuel Octanes HID's All on mod/ AMP reaserch steps

12-09-2012, 09:30 PM	eBay Motors #3 (permalink)
Boreen DuramaxForum Enthusiast Join Date: Sep 2009 Location: Saskatchewan, Canada Posts: 3,017	Post some pic's if you get it done. __________________ 2007 GMC LBZ CC/SB Zone, BDS, Rare Parts, Rancho, Cognito, Bilstien, Fox, Nitto, American Eagle, Tuff Country, Amp Research, AirDog, PPE, K&N, MBRP, Kenwood, Kicker, Sub Thump, US Speedo, WeatherTech Auto Meter, AeroForce, AVS, KC, TruxPort, Bushwacker, Alligator Performance, MA 1991 Camaro "C6" (Sunday Cruiser) LS3/T-56. Slammed and Cammed (Soon To Be Finished)

12-09-2012, 09:32 PM	eBay Motors #4 (permalink)
Varty Yo DuramaxForum Veteran Join Date: May 2011 Location: Regina, Sask! Posts: 1,310	yah for sure! Had them since sept just havent found the time to pulling the grill apart to install them __________________ 2006 LBZ Mike L Stage Awesome! Airdog2 165, 5" MBRP Turbo back EFI Live tuned by Idaho Rob, DSP5, ATP Cognito set at 8" Nor-cal Truck SS idler support/ Rare parts tie rods 37x13.50x20" toyo MT's/ XD Hoss wheels, Fuel Octanes HID's All on mod/ AMP reaserch steps

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Duramax Forum Advertisement