Hey, has anyone ever tried to mount an Edge display in the overhead center pod on a 2007 classic? The one that just has the little storage hole just above the mirror.
__________________ 2007 LBZ 2500HD Classic Crew Cab 4X4
Turbo back 4 inch exhaust
EGR blocker plate
Resonator plugged
Retrax rolling box cover with s/s box rails
Nerf Bars
should work with the overhead mount for an attitude monitor. I haven't seen anyone do it, but I'm sure it'll work just fine as long as the wiring is long enough.
I hope the wiring reaches, it should if i bring it up from the passenger side considering it would go all the way to the driver side for the normal mount. I don't actually have one yet. Could anyone provide me with the length of the wire to the egt probe and the obd cable. Also could someone give me the size of the opening in the dash mounting pod that comes with it pls.
__________________ 2007 LBZ 2500HD Classic Crew Cab 4X4
Turbo back 4 inch exhaust
EGR blocker plate
Resonator plugged
Retrax rolling box cover with s/s box rails
Nerf Bars
Theres an overhead mount you can buy that accepts the Edge. Guy Tripp made it and I'm pretty sure some vendors here can get them.
Here's a really old thread from Diesel Place that has some pics. I dont know if he still makes them, but I'm sure there's one or two laying around somewhere. Billet Overhead Attitude/Gauge Mount - Diesel Place
__________________ 06 Chevy LBZ/Allison 4x4 EFILive, SC IV, stock turbo, lowered, 94,000 miles and counting 12.60 @ 105.41 mph PicturesVideos
The First Law of Thermodynamics states that energy can neither be created nor destroyed... unless it meets Chuck Norris.
works fine with the attitude, the cord is not long enough with the evo, at least i couldn't see any way for it to reach with my evo race...i might try to relocate my obd port to the fuse box to see if it can reach...anybody have any insight on this? just kinda hate to separate the evo to install it in the mount
__________________ 06 GMC LBZ
35" Toyo MTs on 20"s, Evo Race, Cat Delete, EGR Blocked,
AFE Intake, HD Tie Rod Ends and Steering Support, PCV Reroute,
Diamond Eye Downpipe, MBRP 4" all the way back
Transgo waiting to go in
can i get a bump? still trying to see if relocating the obd port would be feasible
__________________ 06 GMC LBZ
35" Toyo MTs on 20"s, Evo Race, Cat Delete, EGR Blocked,
AFE Intake, HD Tie Rod Ends and Steering Support, PCV Reroute,
Diamond Eye Downpipe, MBRP 4" all the way back
Transgo waiting to go in
I think you can get an extension for the obd2 port
__________________ 2006 Chevrolet CC/SB LBZ 4x4
MBRP 4" Down Pipe Back w/ 5" Tip...Bye Bye Kitty!!!!
285 BFG All Terrains on Factory 16"
Tinted Front Windows 20%
B&W Turnover Ball
Hey, has anyone ever tried to mount an Edge display in the overhead center pod on a 2007 classic? The one that just has the little storage hole just above the mirror.
I just bought one from ATS. Its an overhead mount that fits in that spot and it comes with two switches. you can get them with or w/o the switches. But you will definitely need an extension cable for the edge.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
