WTB: FICM for 04.5'-05' LLY

86RedRocket · 12-07-2012, 06:28 AM

I supposedly have one coming, but my source is quite slow at backing up their statements. I'm needing a "plan b" if they do not produce very soon, so if anyone has one in good working order please let me know. Thanks in advance.

**jc1843** · 12-07-2012, 06:58 AM

Don't know why you need one, but are you aware of this problem on the LLY engine??--

At the side of the alternator, the FICM harness tied down with a Zip tie. Cut the tie and pull the wires from the harness and inspect for cuts and wear. The sharp corner of the FICM bracket where it is tied down to, cuts into the wires. Repair and insulate the harness with a short piece of heater hose.

86RedRocket · 12-07-2012, 07:04 AM

Quote:

Originally Posted by jc1843

Don't know why you need one, but are you aware of this problem on the LLY engine??--

At the side of the alternator, the FICM harness tied down with a Zip tie. Cut the tie and pull the wires from the harness and inspect for cuts and wear. The sharp corner of the FICM bracket where it is tied down to, cuts into the wires. Repair and insulate the harness with a short piece of heater hose.

Yes, I'm aware of the common harness problem, but unfortunately we could not find any problems with it. Probed wires as well to see if that would show a short. The only time a short would show is when one of the ends was plugged into the FICM. It blows fuses as soon as the key is turned to the "on" position. The FICM was removed and opened. There were burnt spots on the board. Thanks for your input.

**DMaxxrus** · 12-07-2012, 03:45 PM

I have one if you need it. Just send me a pm.

86RedRocket · 12-07-2012, 06:33 PM

Quote:

Originally Posted by DMaxxrus

I have one if you need it. Just send me a pm.

pm sent

12-07-2012, 06:28 AM	eBay Motors #1 (permalink)
86RedRocket Join Date: Sep 2012 Location: West Monroe, LA. Posts: 6	WTB: FICM for 04.5'-05' LLY I supposedly have one coming, but my source is quite slow at backing up their statements. I'm needing a "plan b" if they do not produce very soon, so if anyone has one in good working order please let me know. Thanks in advance.

12-07-2012, 06:58 AM	eBay Motors #2 (permalink)
jc1843 Super Moderator Join Date: Jun 2008 Location: So. Cal Posts: 9,178	Don't know why you need one, but are you aware of this problem on the LLY engine??-- At the side of the alternator, the FICM harness tied down with a Zip tie. Cut the tie and pull the wires from the harness and inspect for cuts and wear. The sharp corner of the FICM bracket where it is tied down to, cuts into the wires. Repair and insulate the harness with a short piece of heater hose. __________________ Chevy 04.5 LLY, 2X, shell, XDR, MikeL 6spd, TransGo, deep pan, blocked, fingered, de-badged, PCV, 65 Gallon replacement Aero tank, PPE on 2, LBZ-mp, shimmed, Pre-fuel filter, tow mirrors, BU cam, gauges, GPS, Sirius, bags, custom grille, fender vents, HD trans cooler- Curt front hitch, footwell lights, load lights, Studs, head gaskets.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-07-2012, 03:45 PM	eBay Motors #4 (permalink)
DMaxxrus Duramax Forum Supporter Join Date: Feb 2011 Posts: 1,547	I have one if you need it. Just send me a pm.

Remove Advertisements Sponsored Links
Duramax Forum Advertisement