Hey guys I'v got a dyno day & BBQ set up for Sat Sept 6th. The address is 12600 Yukon Ave Hawthorne, CA 90250. The doors open @ 8 A.M. All Diesels welcome. Please post up if your interestedDYNO DAY IS CANCELED!Hear is the mesage from the shop owner: dyno day cancelled
Hi guys, I have to inform all of you that I can't have the dyno day as we had planned. I regret this, but things have changed and I must close my business by the end of the month. This means the dyno must be removed and the floor repaired as original. The time to do this is limited, so I must cancel and start removing the equipment. Again, I'm sorry for any inconvenience this will cause you but I have no choice. Please pass this message along to anyone who was planning to attend. Thanks in advance for your cooperation.
__________________ 00 Ram 2500 4X4 5-Spd,7" Lift, Edge Juce W/Attitude (HOT),120HP Injectors, Custom Garrett GT3788R dual ball-bearing turbo, 5" TB Exhaust, , AirforceOne Performance CAI & Intake horn, H.O. VP44, FASS 150 Kit, ValAir DD Clutch, FluidAmper, Much More to come
Last edited by Diesel Head : 09-02-2008 at 08:35 AM.
Aw come on guys your not going to let a bunch of Cummins guys show ya up are ya It should be fun to get a whole bunch of Diesel trucks together (nomatter what brand they are) & I would really like to see what these Duramaxes can do!
__________________ 00 Ram 2500 4X4 5-Spd,7" Lift, Edge Juce W/Attitude (HOT),120HP Injectors, Custom Garrett GT3788R dual ball-bearing turbo, 5" TB Exhaust, , AirforceOne Performance CAI & Intake horn, H.O. VP44, FASS 150 Kit, ValAir DD Clutch, FluidAmper, Much More to come
aw shoot Phoenix is only a hop skip and a jump away. LOL its only like what a little over 400 miles thats nothin LOL. Realy tho I understand Im just trying to get some of you D-Max guys all fired up and get ya to come down & have some fun. Im really hoping to get a good turn out with a fair amount of trucks.
__________________ 00 Ram 2500 4X4 5-Spd,7" Lift, Edge Juce W/Attitude (HOT),120HP Injectors, Custom Garrett GT3788R dual ball-bearing turbo, 5" TB Exhaust, , AirforceOne Performance CAI & Intake horn, H.O. VP44, FASS 150 Kit, ValAir DD Clutch, FluidAmper, Much More to come
Thank you, and I'd love to make it but im not making enough money nor am i putting down any type of good numbers... lol, a 4" straight pipe and a intake, thats it for power. lol so maybe another time i will make it out when im producing more power...
__________________ LLY Duramax, PPE Hot+2, 8" Fabtech lift, Fabtech Tie rods, 5" Stacks, AFE Stage 1 Intake,Autometer Boost/EGT/Tranny Temp gauges, etc.
I think it's over 1500miles from me, so my wife won't let me, she has to work
__________________ Tom's new truck: red 08 duramax lmm , LTZ, crewcab 3500 4x4, stock for now for towing racecar trailer #10000lb's , spray in liner, has black aftermarket ranchhand cowboy bumber with cowcatcher for that sinister look , matching back bumper, added a toolbox in bed , new lights on push bar chip to come later remember old age isn't for sissies !! never hollar whooaa!! http://i335.photobucket.com/albums/m...1/P9150004.jpg
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
DYNO DAY IS CANCELED!Hear is the mesage from the shop owner: dyno day cancelled 
It should be fun to get a whole bunch of Diesel trucks together (nomatter what brand they are) & I would really like to see what these Duramaxes can do!
chip to come later remember old age isn't for sissies !! never hollar whooaa!! 
Linear Mode
