|09-20-2011, 03:37 PM||eBay Motors #1 (permalink)|
Join Date: Jan 2011
Shift lever is very hard to move
My shift lever in my 2003hd is very very hard to move. I replaced the nsbu and was still the same, now it is stuck into a gear and won't move. unhooked the cable from trans and still nothing, need help.
|09-20-2011, 03:39 PM||eBay Motors #2 (permalink)|
Join Date: May 2011
Replace the cable i had similar problems it would shift out of drive after while cable was broken and frayed.
02ecsb 2500hd LB7 EFI Live 4inch straight pipe Bills custom intake horn torsion bars cranked 285/75/16 Cooper ST MAXX, Suncoast crate Allison, Used to have Predator, Hypertech 3, Juice wit attitude.
Also own a 93 dodge 250 cummins diesel with a getrag 5 speed manual trans pump tweeked 5x12 injectors hx35 turbo, valair dual disc clutch
|09-20-2011, 04:43 PM||eBay Motors #3 (permalink)|
Join Date: Jun 2008
Location: So. Cal
Yes, as noted-- the cable gets water and will rust inside-- the only fix that will last, is to replace the cable.
Chevy 04.5 LLY, 2X, shell, XDR, MikeL Heavy duty up-grade, 6spd, TransGo, deep pan, de-badged, 65 Gallon replacement Aero tank, LBZ-mp, Kennedy pump, shimmed, Pre-fuel filter, tow mirrors, BU cam, gauges, GPS, Sirius, bags, custom grille, fender vents, HD trans cooler- Curt front hitch, footwell lights, load lights, Studs, head gaskets.--- Jerry
|09-21-2011, 03:25 PM||eBay Motors #6 (permalink)|
Duramax Lifetime Supporter
Join Date: Jul 2009
Location: Monroe, La
Mines also hard to shift, how hard is it to replace the cable? I figured that was the problem but just never took the time to mess with it.
-04.5 LLY, CCSB, 4x4,Silver Birch
-68mm Cheetah, Suncoast stage 4/triple disc converter
-ATS manifolds/Up-pipes, Profab EGR delete, 4''exhaust
-Diamone Eye DP, AFE stage 2, EFI Live (Rob's tunes)
-Airdog 165, Shimmed FPRV, Re-routed PCV, 3'' IC tubes
-Superlift 6'' w/traction bars, heavy duty bumpers
-35'' Nitto Trail Graps on Mickey Thompson Sidebitters
-LBZ MP, Sleeves, N-Fab step bars, HID's
|09-23-2011, 11:24 AM||eBay Motors #8 (permalink)|
Join Date: Nov 2010
Cable is easy to replace and takes about an hour. Replace the whole cable together and not just a half. Just make sure you hook the cable up with the shifter in same position as indexed on trans. Their is a n for neutral stamped on the trans case and just line the shift shaft up with it
Sent from a combine cab using AutoGuide