Will someone please provide Torque Specs? - Chevy and GMC Duramax Diesel Forum
Drivetrain Discussion on gearing, CV joints, driveshafts, axles, brakes, etc.

 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 07-02-2019, 12:16 PM Thread Starter
Senior Member
 
southcaliboy's Avatar
 
Join Date: Apr 2009
Location: Port Hueneme, Cal
Posts: 348
Send a message via Yahoo to southcaliboy
Will someone please provide Torque Specs?

Good morning everyone,

Will someone knowledgeable please provide the torques specs for ALL following front end related components on a 2004.5 LLY ?

Upper Control Arms
Lower Control Arms
Wheel Bearing & Hub Assemblies
Center Link
Idler Arm
Pitman Arm
Steering Damper
Outter Tie Rod Ends
Shock Absorber
Idler Arm Bracket Assembly
Alignment Caster / Camber Cam Bolt Kit
Stabilizer Bar Link
Steering Gear Box mounting bolts

This information would be greatly appreciated.

Cheers!

-Tom

BASKET CASE

04 GMC LLY 3/4 ton CCLB, Charcoal Grey Exterior, Charcoal Grey Leather Interior on Flat Black Powder Coated stock GM wheels, Rhino Liner, Roller Style Locking Taneau Cover and Tail Gate, Kenwood Nav System, Dvd, Front and Rear Cameras Recordable
AirBox Mod..LBZ MP.. PCV Re-route
Homeade PCV collection canister with drain valve..#2 & #7 injector harness replacement
Resinator Delete
All Lights on Mod..Single Compressed Air Horn...More to come

Dont Let the Bastards Wear Ya Down
southcaliboy is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 07-02-2019, 01:27 PM
J83
DuramaxForum Enthusiast
 
J83's Avatar
 
Join Date: Apr 2014
Location: Alaska
Posts: 4,706
Quote:
Originally Posted by southcaliboy View Post
Good morning everyone,

Will someone knowledgeable please provide the torques specs for ALL following front end related components on a 2004.5 LLY ?

Upper Control Arms
Lower Control Arms
Wheel Bearing & Hub Assemblies
Center Link
Idler Arm
Pitman Arm
Steering Damper
Outter Tie Rod Ends
Shock Absorber
Idler Arm Bracket Assembly
Alignment Caster / Camber Cam Bolt Kit
Stabilizer Bar Link
Steering Gear Box mounting bolts

This information would be greatly appreciated.

Cheers!

-Tom


those specs should be in this thread if you want to skim through it, i know i posted some from all data as did at least one other member. If nothing else, that is a very detailed and complete thread about rebuilding a front end so theres good info it it besides just the torque specs.

https://www.duramaxforum.com/forum/m...d-rebuild.html

2015 Chevy Silverado 2500 HD 6.6L LML

Last edited by J83; 07-02-2019 at 01:29 PM.
J83 is offline  
post #3 of 7 (permalink) Old 07-02-2019, 02:14 PM Thread Starter
Senior Member
 
southcaliboy's Avatar
 
Join Date: Apr 2009
Location: Port Hueneme, Cal
Posts: 348
Send a message via Yahoo to southcaliboy
Quote:
Originally Posted by J83 View Post
those specs should be in this thread if you want to skim through it, i know i posted some from all data as did at least one other member. If nothing else, that is a very detailed and complete thread about rebuilding a front end so theres good info it it besides just the torque specs.

https://www.duramaxforum.com/forum/m...d-rebuild.html

Thanks J83. Definitely some good info and I found the info that you posted in the thread from all data as well. I'm still open to any knowledgeable members who have info to share, recommendations or even don't forget tools! i may need.

Thanks alot man.

-Tom

BASKET CASE

04 GMC LLY 3/4 ton CCLB, Charcoal Grey Exterior, Charcoal Grey Leather Interior on Flat Black Powder Coated stock GM wheels, Rhino Liner, Roller Style Locking Taneau Cover and Tail Gate, Kenwood Nav System, Dvd, Front and Rear Cameras Recordable
AirBox Mod..LBZ MP.. PCV Re-route
Homeade PCV collection canister with drain valve..#2 & #7 injector harness replacement
Resinator Delete
All Lights on Mod..Single Compressed Air Horn...More to come

Dont Let the Bastards Wear Ya Down
southcaliboy is offline  
Sponsored Links
Advertisement
 
post #4 of 7 (permalink) Old 07-02-2019, 09:21 PM
DuramaxForum Fanatic
 
Join Date: Dec 2010
Location: Southern California
Posts: 7,624
Quote:
Originally Posted by southcaliboy View Post
Good morning everyone,



Will someone knowledgeable please provide the torques specs for ALL following front end related components on a 2004.5 LLY ?



Upper Control Arms

Lower Control Arms

Wheel Bearing & Hub Assemblies

Center Link

Idler Arm

Pitman Arm

Steering Damper

Outter Tie Rod Ends

Shock Absorber

Idler Arm Bracket Assembly

Alignment Caster / Camber Cam Bolt Kit

Stabilizer Bar Link

Steering Gear Box mounting bolts



This information would be greatly appreciated.



Cheers!



-Tom
Download the merchant automotive app and look under the tech section. It will have all the specs you need.

Sent from my XT1635-01 using Tapatalk

LBZ
SoCalMike is offline  
post #5 of 7 (permalink) Old 07-02-2019, 10:19 PM
DuramaxForum Fanatic
 
SilverGorillaLML's Avatar
 
Join Date: Feb 2015
Location: The mountains of va/wva listen for the banjos
Posts: 9,525
Axle Shaft Nut177 lb ftBrake Hose Bracket Bolt80 lb inBrake Hose Clip Bolts106 lb inFrame Cross Bar74 lb ftHub and Bearing Assembly to Steering Knuckle Bolts133 lb ftJounce Bumper Stud Nut22 lb ftLower Ball Joint (Replacement) to Lower Control Arm Nuts52 lb ftLower Control Arm Ball Joint Stud Nut74 lb ftLower Control Arm to Frame Nuts107 lb ftOuter Tie Rod Jam Nut50 lb ftShock Absorber Tennon Nut15 lb ftShock Absorber to Control Arm Bolts19 lb ftShock Absorber to Lower Control Arm Nut59 lb ftStabilizer Shaft Bushing Clamp Bolts37 lb ftStabilizer Shaft Link Nuts81 lb inTorsion Bar Bushing Bracket Replacement Nuts30 lb ftTorsion Bar Support Mounting Nuts70 lb ftUpper Control Arm Ball Joint Stud Nut37 lb ftUpper Control Arm to Frame Nuts140 lb ftIdler Arm to Frame Bolt or Nut73 lb ftIdler Arm to Center Link Nut46 lb ftInner Tie Rod End to Rack and Pinion74 lb ftPitman Arm to Center Link Nut46 lb ftPitman Arm to Steering Gear Nut184 lb ftSteering Dampener to Frame Bracket Nut30 lb ftSteering Dampener to Relay Rod Nut30 lb ftSteering Linkage Special Tool40 lb ftTie Rod to Steering Knuckle Nut48 lb ftAccessory Mounting Bracket Bolts37 lb ftAccessory Mounting Bracket Nuts30 lb ftBall Guide Screws53 lb inBattery Junction Block Retaining Bolt80 lb inConnector Fitting Assembly55 lb ftCoupling Shield and Lock Nut80 lb ftCylinder End Fitting20 lb ftFront Power Steering Pump Mounting Bolts37 lb ftGearbox To Frame Bolts110 lb ftInner Tie Rod to Center Link74 lb ftIntermediate Shaft Slip Coupling Pinch Bolt33 lb ftIntermediate Shaft to Steering Gear Pinch Bolt35 lb ftIntermediate Shaft to Steering Column Pinch Bolt46 ft lbsOuter Tie Rod to the Steering Knuckle37 lb ftPitman Arm to Gear Nut184 lb ftPitman Arm to Relay Rod Nut46 lb ftPitman Shaft Cover Bolts45 lb ftPower Steering Mounting Bolts and Nut37 lb ftPower Steering Pump Mounting Bracket Bolts34 lb ftPower Steering Pump Mounting Studs43 lb ftPower Steering Pump Wiring Harness Ground Bolt80 lb inPower Steering Rear Bracket Retaining Nuts37 lb ftPressure Hose Connection20 lb ftRear Pump Mounting Bolt37 lb ftStub Shaft Housing Bolts46 lb ft

Race/Pulling truck:2012 CumminGs/Built 6.8L/Big air/Big fuel/48RE Swap/PCS 2000/B&M Gated shifter
Kid hauler: 08 Lincoln navigator
Work/dd: 02 4.3 RCLB Silverado
SilverGorillaLML is offline  
post #6 of 7 (permalink) Old 07-03-2019, 11:21 AM
J83
DuramaxForum Enthusiast
 
J83's Avatar
 
Join Date: Apr 2014
Location: Alaska
Posts: 4,706
Quote:
Originally Posted by SilverGorillaLML View Post
Axle Shaft Nut177 lb ftBrake Hose Bracket Bolt80 lb inBrake Hose Clip Bolts106 lb inFrame Cross Bar74 lb ftHub and Bearing Assembly to Steering Knuckle Bolts133 lb ftJounce Bumper Stud Nut22 lb ftLower Ball Joint (Replacement) to Lower Control Arm Nuts52 lb ftLower Control Arm Ball Joint Stud Nut74 lb ftLower Control Arm to Frame Nuts107 lb ftOuter Tie Rod Jam Nut50 lb ftShock Absorber Tennon Nut15 lb ftShock Absorber to Control Arm Bolts19 lb ftShock Absorber to Lower Control Arm Nut59 lb ftStabilizer Shaft Bushing Clamp Bolts37 lb ftStabilizer Shaft Link Nuts81 lb inTorsion Bar Bushing Bracket Replacement Nuts30 lb ftTorsion Bar Support Mounting Nuts70 lb ftUpper Control Arm Ball Joint Stud Nut37 lb ftUpper Control Arm to Frame Nuts140 lb ftIdler Arm to Frame Bolt or Nut73 lb ftIdler Arm to Center Link Nut46 lb ftInner Tie Rod End to Rack and Pinion74 lb ftPitman Arm to Center Link Nut46 lb ftPitman Arm to Steering Gear Nut184 lb ftSteering Dampener to Frame Bracket Nut30 lb ftSteering Dampener to Relay Rod Nut30 lb ftSteering Linkage Special Tool40 lb ftTie Rod to Steering Knuckle Nut48 lb ftAccessory Mounting Bracket Bolts37 lb ftAccessory Mounting Bracket Nuts30 lb ftBall Guide Screws53 lb inBattery Junction Block Retaining Bolt80 lb inConnector Fitting Assembly55 lb ftCoupling Shield and Lock Nut80 lb ftCylinder End Fitting20 lb ftFront Power Steering Pump Mounting Bolts37 lb ftGearbox To Frame Bolts110 lb ftInner Tie Rod to Center Link74 lb ftIntermediate Shaft Slip Coupling Pinch Bolt33 lb ftIntermediate Shaft to Steering Gear Pinch Bolt35 lb ftIntermediate Shaft to Steering Column Pinch Bolt46 ft lbsOuter Tie Rod to the Steering Knuckle37 lb ftPitman Arm to Gear Nut184 lb ftPitman Arm to Relay Rod Nut46 lb ftPitman Shaft Cover Bolts45 lb ftPower Steering Mounting Bolts and Nut37 lb ftPower Steering Pump Mounting Bracket Bolts34 lb ftPower Steering Pump Mounting Studs43 lb ftPower Steering Pump Wiring Harness Ground Bolt80 lb inPower Steering Rear Bracket Retaining Nuts37 lb ftPressure Hose Connection20 lb ftRear Pump Mounting Bolt37 lb ftStub Shaft Housing Bolts46 lb ft







2015 Chevy Silverado 2500 HD 6.6L LML
J83 is offline  
post #7 of 7 (permalink) Old 07-03-2019, 12:15 PM
DuramaxForum Fanatic
 
SilverGorillaLML's Avatar
 
Join Date: Feb 2015
Location: The mountains of va/wva listen for the banjos
Posts: 9,525
Thou askith thou shall receiveith all the speciths

Race/Pulling truck:2012 CumminGs/Built 6.8L/Big air/Big fuel/48RE Swap/PCS 2000/B&M Gated shifter
Kid hauler: 08 Lincoln navigator
Work/dd: 02 4.3 RCLB Silverado
SilverGorillaLML is offline  
post #8 of 7 (permalink) Old 07-03-2019, 03:29 PM Thread Starter
Senior Member
 
southcaliboy's Avatar
 
Join Date: Apr 2009
Location: Port Hueneme, Cal
Posts: 348
Send a message via Yahoo to southcaliboy
Quote:
Originally Posted by SoCalMike View Post
Download the merchant automotive app and look under the tech section. It will have all the specs you need.

Sent from my XT1635-01 using Tapatalk
Thank you SoCalMike. I downloaded that and found that info.

very appreciated.

Cheers

BASKET CASE

04 GMC LLY 3/4 ton CCLB, Charcoal Grey Exterior, Charcoal Grey Leather Interior on Flat Black Powder Coated stock GM wheels, Rhino Liner, Roller Style Locking Taneau Cover and Tail Gate, Kenwood Nav System, Dvd, Front and Rear Cameras Recordable
AirBox Mod..LBZ MP.. PCV Re-route
Homeade PCV collection canister with drain valve..#2 & #7 injector harness replacement
Resinator Delete
All Lights on Mod..Single Compressed Air Horn...More to come

Dont Let the Bastards Wear Ya Down
southcaliboy is offline  
post #9 of 7 (permalink) Old 07-03-2019, 03:29 PM Thread Starter
Senior Member
 
southcaliboy's Avatar
 
Join Date: Apr 2009
Location: Port Hueneme, Cal
Posts: 348
Send a message via Yahoo to southcaliboy
Quote:
Originally Posted by J83 View Post





but very appreciated

BASKET CASE

04 GMC LLY 3/4 ton CCLB, Charcoal Grey Exterior, Charcoal Grey Leather Interior on Flat Black Powder Coated stock GM wheels, Rhino Liner, Roller Style Locking Taneau Cover and Tail Gate, Kenwood Nav System, Dvd, Front and Rear Cameras Recordable
AirBox Mod..LBZ MP.. PCV Re-route
Homeade PCV collection canister with drain valve..#2 & #7 injector harness replacement
Resinator Delete
All Lights on Mod..Single Compressed Air Horn...More to come

Dont Let the Bastards Wear Ya Down
southcaliboy is offline  
post #10 of 7 (permalink) Old 07-03-2019, 03:30 PM Thread Starter
Senior Member
 
southcaliboy's Avatar
 
Join Date: Apr 2009
Location: Port Hueneme, Cal
Posts: 348
Send a message via Yahoo to southcaliboy
Quote:
Originally Posted by SilverGorillaLML View Post
Axle Shaft Nut177 lb ftBrake Hose Bracket Bolt80 lb inBrake Hose Clip Bolts106 lb inFrame Cross Bar74 lb ftHub and Bearing Assembly to Steering Knuckle Bolts133 lb ftJounce Bumper Stud Nut22 lb ftLower Ball Joint (Replacement) to Lower Control Arm Nuts52 lb ftLower Control Arm Ball Joint Stud Nut74 lb ftLower Control Arm to Frame Nuts107 lb ftOuter Tie Rod Jam Nut50 lb ftShock Absorber Tennon Nut15 lb ftShock Absorber to Control Arm Bolts19 lb ftShock Absorber to Lower Control Arm Nut59 lb ftStabilizer Shaft Bushing Clamp Bolts37 lb ftStabilizer Shaft Link Nuts81 lb inTorsion Bar Bushing Bracket Replacement Nuts30 lb ftTorsion Bar Support Mounting Nuts70 lb ftUpper Control Arm Ball Joint Stud Nut37 lb ftUpper Control Arm to Frame Nuts140 lb ftIdler Arm to Frame Bolt or Nut73 lb ftIdler Arm to Center Link Nut46 lb ftInner Tie Rod End to Rack and Pinion74 lb ftPitman Arm to Center Link Nut46 lb ftPitman Arm to Steering Gear Nut184 lb ftSteering Dampener to Frame Bracket Nut30 lb ftSteering Dampener to Relay Rod Nut30 lb ftSteering Linkage Special Tool40 lb ftTie Rod to Steering Knuckle Nut48 lb ftAccessory Mounting Bracket Bolts37 lb ftAccessory Mounting Bracket Nuts30 lb ftBall Guide Screws53 lb inBattery Junction Block Retaining Bolt80 lb inConnector Fitting Assembly55 lb ftCoupling Shield and Lock Nut80 lb ftCylinder End Fitting20 lb ftFront Power Steering Pump Mounting Bolts37 lb ftGearbox To Frame Bolts110 lb ftInner Tie Rod to Center Link74 lb ftIntermediate Shaft Slip Coupling Pinch Bolt33 lb ftIntermediate Shaft to Steering Gear Pinch Bolt35 lb ftIntermediate Shaft to Steering Column Pinch Bolt46 ft lbsOuter Tie Rod to the Steering Knuckle37 lb ftPitman Arm to Gear Nut184 lb ftPitman Arm to Relay Rod Nut46 lb ftPitman Shaft Cover Bolts45 lb ftPower Steering Mounting Bolts and Nut37 lb ftPower Steering Pump Mounting Bracket Bolts34 lb ftPower Steering Pump Mounting Studs43 lb ftPower Steering Pump Wiring Harness Ground Bolt80 lb inPower Steering Rear Bracket Retaining Nuts37 lb ftPressure Hose Connection20 lb ftRear Pump Mounting Bolt37 lb ftStub Shaft Housing Bolts46 lb ft

Thank you SilveGorillaLML Great info!

BASKET CASE

04 GMC LLY 3/4 ton CCLB, Charcoal Grey Exterior, Charcoal Grey Leather Interior on Flat Black Powder Coated stock GM wheels, Rhino Liner, Roller Style Locking Taneau Cover and Tail Gate, Kenwood Nav System, Dvd, Front and Rear Cameras Recordable
AirBox Mod..LBZ MP.. PCV Re-route
Homeade PCV collection canister with drain valve..#2 & #7 injector harness replacement
Resinator Delete
All Lights on Mod..Single Compressed Air Horn...More to come

Dont Let the Bastards Wear Ya Down
southcaliboy is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Chevy and GMC Duramax Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in













Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome