Still trying to figure this out
New member, first post! Sorry if this is not the right place for this post.
I have a 2019 Chevy 2500 that I recently leveled with kyrptonite stage 3 kit with bilsteins. Also I put 1.5 inch wheel spacers on (per a friend who also had the kit) and 35x12.50s. On first attempt to drive outta shop I couldn’t turn at all. First to be trimmed away was bumper and carpet wheel wells. Then I had to start hacking at fender on the back side of wheel well. Finally got it trimmed to a tolerable amount but I still scrub really bad when the suspension dips down and turning. I’ve searched through some threads and seen where many people are running this set up with 35s and minor trimming. Just looking for some tips and tricks before I try to down size the tire. I’m sitting around 1/2-3/4 inch lower in the front.