Chevy and GMC Duramax Diesel Forum - View Profile: Ron Nielson

Ron Nielson Ron Nielson is offline

DuramaxForum Veteran

  Visitor Messages

Showing Visitor Messages 1 to 1 of 1
  1. Kdcarmack@gmail.com
    10-06-2018 08:02 PM - permalink
    [email protected]
    Been having problem for last 6 months. It does have the dpf deleted and i have a programmer for that and also have an edge programmer for fuel economy. I run it on 5 for driving around town and stock or 0 when pulling a trailer. So I drove the truck last Saturday pulling a 32 dove tail loaded with skid steer (total weight 15,000 lbs) went in limp mode 7 times in 50 miles was able to clear code with edge, and same on trip back home. Usually goes in limp mode around 50 mph under heavy loads. Truck sit over night and went out to start it and would not start. Tried pumping filter housing while cranking truck still no start. Talked to Chevy duramax mech and he said sounds like either pressure reg or injector pump was out. Ordered injector pump and installed, replaced fuel and air filters with ac delco filters and truck started. Truck feels like it has more power and more pick-up. Pulled trailer loaded with lumber and pallet of concreate and again went into limp mode around 50mph.

  About Me

  • About Ron Nielson
    Location
    Berryton, KS
  • Signature
    Ron Nielson
    2008 Silverado LT, CCLB, Edge Insight CTS
    2009 Arctic Fox 29-5T, Silver Fox Edition, Onan 3600 LPG generator

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 01-20-2020 09:58 AM
  • Join Date: 08-13-2009
  • Referrals: 0

  Mentions

No results to display...

  Quotes

01-19-2020
01:24 PM - Ross07lbz quoted Ron Nielson in post Wait to start light takes a long time to go out
When I'm starting my truck, I pu...
01-17-2020
06:01 AM - deez112 quoted Ron Nielson in post Rpo code dpn
DPN Mirrors, outside heated pow...
01-16-2020
02:23 PM - Ron Nielson quoted padurmax in post Duramax LML no crank no start - bad relay
Should I return the part I go...
01-15-2020
02:45 PM - J83 quoted Ron Nielson in post Duramax LML no crank no start - bad relay
That's a pretty sad looking fuse...
01-13-2020
11:29 AM - padurmax quoted Ron Nielson in post Duramax LML no crank no start - bad relay
That's a pretty sad looking fuse...
01-11-2020
04:46 PM - Cm3dmax quoted Ron Nielson in post Help to get Smoother Ride for 03 Crew Cab
I don't think I see the jounce b...
12:41 PM - Ron Nielson quoted bostonhoff in post 13 LML Wipers Will Not Shut Off
Thanks! Unfortunately I believe...
01-10-2020
01:48 PM - Ron Nielson quoted Mafrici in post Duramax electrical problems. Please help
We own a 2016 GMC Denali Dur...
01:44 PM - Ron Nielson quoted Littlerobo8 in post Duramax electrical problems. Please help
Hello first time post not sure i...
01-08-2020
11:57 AM - devinhill92 quoted Ron Nielson in post Belt Tensioner & Idler Pulley Bolts
You can find out about all the p...
01-03-2020
02:55 PM - caleb.broege quoted Ron Nielson in post In cab fan
I think about 8 amps or so. Look...
01:21 PM - J83 quoted Ron Nielson in post In cab fan
I think about 8 amps or so. Look...
01-02-2020
04:28 PM - Ron Nielson quoted J83 in post Low fuel rail pressure, need help diagnosing
Would that cause low rai...
02:29 PM - J83 quoted Ron Nielson in post Low fuel rail pressure, need help diagnosing
Many reports about the FASS fuel...
01:34 PM - thumbs quoted Ron Nielson in post Regen Problem
Without a DTC code, I have no id...
12:10 PM - thumbs quoted Ron Nielson in post Regen Problem
When the warning light comes on,...
12:08 PM - Ron Nielson quoted thumbs in post Regen Problem
The other day while the tru...
12:02 PM - Ron Nielson quoted New2diesel2003 in post Starter diagnoses and purchase
Messed with wires again and again, ...
01-01-2020
06:27 PM - KazMan quoted Ron Nielson in post "Check Trailer Wiring" Warning Message
TSC light? What does this mean, ...
12-29-2019
10:48 PM - USOffRoad quoted Ron Nielson in post 2012 LML Engine Coolant Issue
Of course your problem could be ...
 
For the best viewing experience please update your browser to Google Chrome