|Topic Review (Newest First)|
|10-04-2007 06:40 PM|
|Diesel_freak_72||Sounds like to me that your torque converter is not getting the command to lock up. And if your brake lights do not work it sounds like to me that your brake switch has either failed or you have some other issue there. This switch illuminates your brakes lights when you push the brake peadal as well as command the torque converter to unlock. If this switch has failed it may not allow the brake lights to work or allow the command to the torque converter lockup command to happen. This switch is located underneath the steering wheel and it is connected to the brake pedal and the pushrod going to the master cylinder. It is a boxy looking switch you cant miss it.|
|10-04-2007 01:57 PM|
ok so i got a 93' 6.5 1 ton chevy.....it shifts hard into second and then from second it shifts to third within 200 rpms and then into od but it shows at 45 im doin 2000 rpms and then at 55 about 2500-2600,,,, usually at 55 i run 2000 or alittle under ive changed the tps sencer, the shift sencers in the tranny, the rpm sencer, and the transmission module i didnt change the eprom in that...it keeps showin the code for the tps sencer,,,, also my tail lights stopped workin right about the time this all started happenin???