im about to install a devilsown dual nozzle setup on a lb7. Is it better to put both nozzles right before the intake bridge such as in the image of trprowen install. or have one nozzle right before the intake bridge and one right after the intercooler?
If I'm understanding you right, yes danzick pic has both nozzles there, one at top of tube and one pointing back toward firewall. Closer to firewall you see the splitter. At least that's what I'm seeing.
About the solenoid before the pump back on the first page. it seems that the 150 psi solenoid that snow has was having problems keeping closed or open with the 220psi of their pump, so they suggested going pre-pump. Aquastealth, Devil's Own, and Coolingmist all have 250psi rated solenoids, so it may be something to think about.
My move was turbo, 660cc at 13 psi, the current car is NA, and doesn't have the meth kit. it got shipped back to the states, but I have 30 liters of methanol, and 60 or so liters of -60C washer fluid left over after the sudden purchase of my current car.