Chevy and GMC Duramax Diesel Forum banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
allison 1000
1-13 of 13 Results
  1. Transmission Shop
    So about a month ago, my truck started to have transmission issues. The main symptom are ranger selector is missing, whenever I shift into rev or drive it shifts extremely hard, it’s stuck in limp mode, and the check engine light is on. Whenever I do have it in drive it takes a little bit to...
  2. Transmission Shop
    I have a burnt up 2006 allison 1000 out of my 2007 lbz 1 ton dually. I purchased another Trans out an 07 lbz but it doesn't have input speed sensor on bell housing like mine does. Can I swap bell housing to solve this issue? If so, how technical is that project? This would be an in field swap...
  3. Transmission Shop
    My 07 Chevy 3500 classic Allison Transmission operates normally except for two issues. One, Transmission growls in gear only when stopped, and number two, when stopped in reverse gear and shift into Park when I let off the brake the truck moves almost 12 in in Reverse before it settles down...
  4. Transmission Shop
    I’ve been looking for a good core to rebuild to just swap into my truck and this guy a couple hours away from me claims he has an Allison 1000 6 speed from an 06 classic with only 130000 km on it. I’m not to good with identifying serial numbers or dates but here’s the picture of the tag. Any...
  5. Transmission Shop
    So I recently cracked the bell housing to my transmission and it lost all the oil. I’ve been looking around at good used transmissions (used because it is my work truck) and I’ve been told the plugs and other things change from year to year. I have an 06 LBZ with the Allison 1000 six speed. Am I...
  6. Transmission Shop
    Hey guys. Been working on a 2010 Chevy Duramax HD. Allison 6 speed. Ive replaced both Trim solenoids, and all shift solenoids. New Filters, new pressure switch assembly. Yet i am still getting a code p0877, Which says is a low voltage problem. Ive traced wires, replaced the internal harness, and...
  7. 01-04.5 LB7 Duramax Powertrain
    A 2004 lb7 GMC 2500 crew cab short box has just come into my possession, before I got it the front differential didn't disengage and blew the u-joint in between the front driveshaft and the t-case. That sent the driveshaft flying around and it smashed the trans at 120 kph breaking the shift...
  8. Transmission Shop
    I have a whole bunch of codes on my 04.5 dmax, and I was looking for a little guidance from someone who knows more than me
  9. Transmission Shop
    Hi. I’m new here and have a problem I’m hoping someone can help with. I have an 07’ Chevy 3500hd ext wheelbase non dually and out of the blue I went to start the truck and it shifts extremely hard into gear but will only move in Reverse. When in drive it slams into gear and then when you let off...
  10. Transmission Shop
    Good day all, i'm looking for a allison transmission specialist in Southern California. I would much rather pay a family shop vs the local dealership. I'm not looking to save money, I'm looking for a professional who has integrity in their work. Thanks!
  11. 911 Problems Forum
    I have a 2008 gmc 2500 just had a ppe stage 5 trans and convert put in a year ago. About 2 weeks ago I had a minor tick that would get louder with rpm and I was driving home from work and its now really bad. I have taken the transmission out to check the flex plate and still all in 1 piece...
  12. 911 Problems Forum
    Im new this seemed like the best place to post as I've been tackling it for months. I'll try to keep it short Bassicly trucks at 620xxxkm shes beat the fans owned it since 05 n I'm trying to do it cheapest way possible Bought "new" trans (330xxx) , just did trans, still in limp...I RODE IN THE...
  13. Transmission Shop
    I just did a fluid, internal filter, external spin on filter, and pan gasket change. When I finished I looked at the old internal filter and realized there was no seal on it, which means it separated and stuck in the hole and I just jammed the new filter with its gasket into the old gasket. I’ve...
1-13 of 13 Results
Top