Chevy and GMC Duramax Diesel Forum banner

brakes

  1. Please help no brakes after LML hydroboost swap

    2007.5 + (GMT 900) Non Powertrain New Body Style
    Hey guys so I just replaced my steering gearbox with a redhead one and replaced my burnt up ps pump and after that my power steering was great but my brakes were pretty bad still.. so I did some reading on the forums and decided to replace the hydroboost with the LML one. Just got it all back...
  2. Steering wheel and brake pulsating

    General Discussion
    New to this, but I’m a standstill.. had it looked at by a diesel mechanic and he said it’s the p/s pump, so here’s the problem when in the lower rpms driving or stopped if I press the brake or turn the wheels I get this bad grinding sound and a lot of vibration... the whole master cylinder...
  3. Brakes Sticking, All Four!

    Maintenance
    New Here, Thanks to all of you who contribute to this site. It helped me fire up the truck I bought. Now I have a new problem and after running a quick search, I couldn't find anything relevant to my situation. The truck was running fine until I noticed it getting sluggish. The RPMs started...
  4. 2003 3500 brakes are soft

    2001 - 2007 (GMT800) Non Powertrain
    I have a 2003 3500 4x4 with a dump body on it. my problem is the brakes seem soft or spongey like they have air in the system. I have replaced the master 3 times, the front calipers, all the pads and I have bleed the brakes exstensively. The brakes are barely able to stop the truck when its...
  5. Front Brake Noise

    2007.5 + (GMT 900) Non Powertrain New Body Style
    I recently had a lift put on my '08 GMC, and now the front brakes are constantly squeaking even when I'm not applying the brakes. It seems like there is always pressure on the front brakes. I have to make a trip tomorrow and would appreciate any help.
  6. Front Brakes.

    911 Problems Forum
    I recently had a lift put on my '08 GMC, and now the front brakes are constantly squeaking even when I'm not applying the brakes. It seems like there is always pressure on the front brakes. I have to make a trip tomorrow and would appreciate any help.
  7. Grinding noise with braking

    Drivetrain
    I have a metal on metal grinding noise that occurs when I am slowing down at any speed and intensifies when I step on the brake. Sounds like it is coming from the brakes but can not pinpoint it. I have had the brakes checked and have good pads. Replaced the back ones even though they were good...
  8. 2007 Kodiak 4500

    911 Problems Forum
    Hi, My name is Diana and I need some help from Kodiak owners. I hope it is ok to post here as I'm trying to help out a fellow Chevy owner. If anyone is familiar with the correct tee to get to this fellow for a Max Brake Controller that he received from me, I would be eternally grateful. I...
  9. brakes sticking

    911 Problems Forum
    My rear pass brake has been sticking. Rim gets really hot and you can smell the brakes. This is what I've done so far. I cleaned the slides up, then replaced the caliper, removed parking brake pads, switched rear rotors. Not sure what else to try. They are still sticking. It is only one...
  10. 03 Silverado E.Brake issue

    911 Problems Forum
    Well guys, I am at wits end trying to figure out my parking brake. the shoes are good, the cable is hooked up, the pedal goes to the floor and will release and come back up like normal, BUT, its not working, and I have like ten inches of slack under the truck????? This is the original parking...
  11. Rear Diff Torque specs

    911 Problems Forum
    Hey guys, I'm just about to do rear brakes on my 06 3500, and for the life of me i cannot find the torque specs for the rear bearings:help. Does anyone know them? It would be greatly appreciated! Also any pointers on doing this brake job?
  12. Brakes

    911 Problems Forum
    When I got home yesterday I noticed a smell from the back of truck. Bent over to look under it and noticed the drivers side rear wheel was blistering hot and that brake smell comming from it. Took wheel off and looked around didnt notice anything, turned the hub by hand.....makes some dragging...
Top