Chevy and GMC Duramax Diesel Forum banner

powertrain

  1. Diesels
    I need to know what i would need to do in order to get a common rail 5.9l cummins engine to work in a 2003 silverado 2500hd. i only really need to know about the electronics and computers. Or if anybody knows a place that does these conversions.
  2. 06-07 LBZ & LLY Duramax Powertrain
    :help First things first I am new here so let me take a moment and say hello to everyone. I will now get right to my question. I have nearly completed the 2wd to 4wd swap of my 06 Duramax 2500 6.6L 6spd. Although I read all of the threads about not doing it I did it anyway. And yes it was a...
  3. 911 Problems Forum
    I have a 2004.5 LLY Duramax that I am having the tranny rebuilt in. The guy doing the work told me my transfer case is cracked from the drain plug to the seal. Does anyone know where I could get a transfer case for this? Good price and quick. I live in western Pennsylvania
  4. 911 Problems Forum
    Just put in a detroit truetrac in my rear end. Blew up the G80. when setting it how much free play should be between the crown gear and the pinion gear? Also how do you set the pre load on the carrier bearing? and what temp should the diff at just rolling down the highway? Anyone that can help...
  5. Drivetrain
    Last week I snapped my CV Shaft, so I bought a new one from advanced auto and installed it. Now when I drive my truck There is alot of squeaking and grinding noise. It is a really loud constant noise, Im pretty sure the noise dies down when I turn right. Any Ideas?
  6. 911 Problems Forum
    i have noticed over the weekend that when i slow down and the engine braking is slowing the truck that there is a noise which i thought was a brake squeeiling at first but after looking further it souds as though it is coming from the turbo.only does it while slowing down at a slow speed. 05 cc...
  7. 911 Problems Forum
    Had the rear diff screw up on my the locker would not come out so it was scuffing the tire as a turned. Took it apart this morning and the little gear that runs the governor for the limited slip has busted into pieces and the little clutch system is busted up as well. The dealer ship want $500...
  8. 911 Problems Forum
    I got a 2003 GMC 2500hd. Its got a few things done to her but nothing much with the engine. When I drive it makes a clicking sound. When its in park or nuetral it doesnt make the sound. It will only make it when the truck is moving so I'm hoping it has something to do with the axle or drive...
  9. 911 Problems Forum
    On my way home last night just cruzon along about 40 or so I hear a pop and the truck hops give it some gas nothin happens. Pull overlook underneeth everything looked ok hop back in put it in four wheel. Give it gas. Nothing. Give it a little more and I feel something let loose get home look...
  10. Drivetrain
    i got new u joints for my 04 chevy 2500 duramax for the ticking noise in the rear end....only problem is i dont know if its as simple to put them in as i think it is. any links or suggestions to help walk me through it?
  11. 911 Problems Forum
    im attempting to put a clutch in, i have to split my transfer case, all the bolts are out and only spreads half an inch?????? both shafts are out??????
  12. 911 Problems Forum
    I have a really weird problem with my truck now. Truck sat for a couple days, drove it today and when you let off the throttle you can feel what seems to be the rear end moving (shifting) around. It is quite noticable and i am quite concerend. Has anybody else experienced this problem? What...
Top