Chevy and GMC Duramax Diesel Forum banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 25 Results
  1. Suspension&Steering
    My trucks is lifted right now I want to bring it back down to stock height all around… What will I need to buy and get to come back down to stock height.. also would be great if anyone was selling there stock LLY suspension… thank you !
  2. Wheels & Tires
    Hello all, currently I am running 33x12.5r20 without a lift (yes I know… regrets were made) and the truck rides like a Mack truck. I have done bilstein shocks all around which made only the slightest difference and I don’t know where else to go without spending thousands of dollars. Do I go...
  3. Maintenance
    Good afternoon, Long time reader, first time poster. I have a drivers side clunk that cropped up a few days ago. I can feel it through the floor board. It occurs only at low speeds and when turning. At highway speeds or on washboard it is not present. Entire front end has been replaced in the...
  4. Suspension&Steering
    Hi all, An update from the road. When I got this rig (2019 Silverado 3500HD and Northern Lite truck camper) the only suspension modification I put on was Torklift Stableoads. We traveled for about 15k over 3 months and while it was okay, I knew it could be better. Some sway and although the...
  5. 2011-2016 (Non Powertrain)
    I have a 2013 Denali. I've been looking at the Fabtech 3.5" that comes with new knuckles. I've seen mixed feelings about this kit since it doesn't drop the diff and I've seen mixed feelings about fabtech in general. I was planning on using it with a suspensionmaxx or similar differential drop...
  6. Suspension&Steering
    I have 2011 silverado 2500 and I'm trying to install fox shocks to replace my old rough country lift. But the bumpstop extensions I think is not letting me get bottom shock bolt in the factory location or in the old location of rough country shocks. Any ideas how to do it correctly. Thanks
  7. Exterior
    I am new to diesels and lifted trucks. You guys are going to laugh but I have a question. I took my 2013 Cevy 2500 HD duramax with a 6 inch lift in to get the front end checked. They corrected some things but now I am wondering if I got messed over. I know nothing about truck suspensions...
  8. Introductions
    I NEED to improve The suspension on my 2006 Duramax short bed pick up. I pull a 30 foot fifth wheel RV. Returning on interstate 25 in Colorado recently it felt like I was riding in a Hay wagon. I won’t mention how the pot money here in Colorado hasn’t improved the roads whatsoever but thats...
  9. General Discussion
    Hey Guys, I currently own a 2019 chevy 2500 duramax LTZ, and am looking for the best option and route for a lift kit. Ideally I would like to have a 4" lift to hopefully squeeze some 35's in there, but am scared of messing with the towing capabilities of the truck. Right now I have stock...
  10. Wheels & Tires
    I have a 2002 DMax - Allison which I bought new - it just turned over 55,000 miles - I know, just about worn out. My question has to do with badly wearing out front tires despite going to reputable service department. The original tires on the front went amazingly fast - passenger side wore to...
  11. Suspension&Steering
    Ordered up some new sway bar end links because my old ones were toast in addition to one being bent kinda bad. I was installing the new inks, when I noticed a pretty big difference in the geometry of my two end links and ends of my sway bar. I am the second owner of this truck so I am unsure of...
  12. 04.5-05 LLY Performance Parts Discussion
    Hey guys, I know running 14 wides especially with 375/45s is a lot of weight spaced out to be putting on the hubs. But I snapped 2 hubs within a week. I was told they were upgraded HD hubs, I’m looking into going with kryptonite hubs. But wanted to make sure I didn’t have to upgrade anything...
  13. 2011-2016 (Non Powertrain)
    So about a week ago I bought a ‘15.5 Denali with 140K miles on it. From the pictures it looked like a stock truck suspension-wise except it has air bags on the rear leafs. Then I get the truck delivered to me and it’s on 35x12.50s on the factory 5 spoke 20” wheels. Done my share of digging...
  14. 2007.5 + (GMT 900) Non Powertrain New Body Style
    Anyone know where I can get factory rear suspension bumpers? I called the local dealer and they were $110/side and $5.25/side for the nut that holds them on. Someone that had my truck before my dad got it hauled an in bed camper and put extra long bumpers on. There's only maybe 3/4" clearance...
  15. Wheels & Tires
    Ok so I bought this truck a few months ago, got an incredible deal on it. It came with some 22" rims, they looked like sh!t because they were basically drag slicks for rubber on them so i took them off and went to my stock rims. I kinda wanna put them back on but do some aggressive tread on...
  16. Introductions
    Hello All, I am with trail master suspension and we are a new sponsors to DF forum. I will be posting some of our trail master suspension lifts and leveling kits for all to see. For those interested in our products and would like to make a purchase we don't sell direct to the public but we have...
  17. Looking For/ Wanting To Buy
    I want a lift for my truck. Anything from 4 to 6 inches is what i'm looking for. If anyone has one that their looking to get rid of, i'll handle the shipping and all. Thanks.
  18. Suspension&Steering
    I was wondering if anybody knew of a shop in the Dever area that can install a Cognito lift.
  19. Suspension&Steering
    The NEW Dmax Kryptonite series tie rods are available now. Here is a chance to get a set for FREE !!!! We are giving away a set of these increadably strong tie rods to one lucky Duramax owner. We will be selecting and notifying the winner 7/31/10. Here's what you need to do to enter. 1-Respond...
1-20 of 25 Results
Top