Chevy and GMC Duramax Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 15 Results
  1. Gauges, Electronics and Wiring.
    Hey, i’m doing a cab swap on my 2003 gmc sierra 2500hd, electricity switched transfer case. I am using a 2006 chev 1500 2wd cab. I am wondering what to do with my 4wd switch to hook it up. It has 2wd, 4 hi and 4 low, no auto 4wd. I pulled the dash apart on the 2006 2wd cab and noticed it had one...
  2. Duramax Engine Swaps
    I have a 2001 with blown engine . I have two options. I have a complete donor truck for 2008 LMM or a 2003 LB7 with wire harness . Both will be challenging . Both have around 150k . LMM has delete kit and efi live . 2003 has brand new injectors and 60 day engine warranty. What would be the best...
  3. 07.5-10 LMM Duramax Powertrain
    I recently picked up a 2007.5 3500HD Extended cab long box with the 6.0. THis is the truck I've always wanted but it is missing the 6.6 and Alison to make it perfect. The 6.0 is a solid engine but nothing compared to the Duramax especially in the mileage department. Sooo, I am contemplating...
  4. General Discussions
    Not as familiar with duramax but if I wanted to build an LMM from the image in this post would I need to even worry about anything with anything emissions wise And avoid it all? Or would it be easier to get an LBZ and put it in an LMM body?
  5. General Discussions
    If I wanted to put an LBZ into an LMM body what problems would I run into? What I can think of so far is the wiring harness? Any tips
  6. Duramax Engine Swaps
    I’ve seen a few posts on here about swapping a duramax into a gas truck; and everyone saying it’s not worth it unless you have a complete donor truck. I have a free LMM donor truck that is complete minus a ball joint and a few body panels. I have a 2005 2500hd with 6.0L, I want to swap the LMM...
  7. 01-04.5 LB7 Duramax Powertrain
    So a couple of months back I rolled my truck in a freak accident two weeks after purchase sadly, and although I was able to get it driving again has never quite looked as good as before considering I did it by myself in a barn. Recently I have been given an opportunity that I just don't want to...
  8. Kodiak & Topkick Forum
    Having some discrepancies with the swap and really needing some help and guidance as it's a very important work truck of mine and has been under the knife way to long gotta start making some real progress it's mostly wiring related who can help thanks in advance guys muchly appreciated
  9. 01-04.5 LB7 Duramax Powertrain
    A 2004 lb7 GMC 2500 crew cab short box has just come into my possession, before I got it the front differential didn't disengage and blew the u-joint in between the front driveshaft and the t-case. That sent the driveshaft flying around and it smashed the trans at 120 kph breaking the shift...
  10. Duramax Engine Swaps
    Hello, i have a 02 LB7 Complete parts truck. i want to swap it into my 2005 GMC Duramax, what am i looking at needing for this? the LB7 is freshly rebuilt bigger injectos turbo mods headgaskets, etc no blow by. what's the easiest way to do this swap? and what will i need
  11. 11-16 LML Duramax Powertrain
    We have a 2012 Silverado 3500 with at least 1 cracked piston. Does anyone know how difficult it would be to swap in a complete L5P? Or just swap in the short block? Is it even possible?
  12. Drivetrain
    Anybody ever put a zf6 trans in an 73-87 chevy pickup? The trans looks a lot longer than the old sm-465s that came in them and wondered how everything would line up? Im sure I would need a new drive shaft but would the hole in the floor line up? Just thinking about a project...
  13. Duramax Engine Swaps
    Hey guys need some advice on the latest project.... I've got a 1972 C20 that I want to swap the tired 350 for a Duramax. So far that I've done the research for and found out that each generation has its own problems. I'm wondering which one that you guys would suggest dropping in. Then once...
1-13 of 15 Results
Top