Chevy and GMC Duramax Diesel Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter #1
Hey guys I am/was (ran out of daylight) installing my airdog 2 and the install manual seems to contradict itself. The pictures are I'm assuming are of an airdog 1. All the pics show the pump mounted with the water separator pointed to the forward part of the truck. But doing it like this the 3/8 fuel return connection is toward the rear of the truck. The line with the 3/8 connection and 90+90 bends now have to go forward then back. The pics show the connection on the forward part in the manual. Does any of this make sense? Does any of this really matter? These crappy instructions are as horrible as promised. Thanks in advance.
 

·
Registered
Joined
·
897 Posts
The picture in the manual is mirror imaged, the bent line goes forward, the pressure regulator screw goes to the rear of the truck.
 

·
Registered
Joined
·
41 Posts
Discussion Starter #3
Sweet thanks for that. I thought so I just wasn't sure and before I started shortening the hoses I wanted to be sure.
 
1 - 3 of 3 Posts
Top