Chevy and GMC Duramax Diesel Forum banner
1 - 3 of 8 Posts

· Registered
Joined
·
233 Posts
Discussion Starter · #1 ·
So a few months ago I had my guy install a rough country 4" lift. Long story short, 3 different alignment shops later my truck is still pulling hard to the right. The 1st shop were a bunch of knuckleheads, the 2nd and 3rd were very reputable and spent a ton of time on it. They say the camber and something'r other are maxed out and cant be aligned any more. Never installed a lift in a vehicle before, but I can't believe there's this big of a noticable issue that the shops say can sometimes just happen with a lift kit.
Is there anything I can do?
If I let go of the steering wheel it will jump over to about 1:30-1:45 so it's super annoying to drive.
 

· Registered
Joined
·
233 Posts
Discussion Starter · #5 ·
No I have not talked to them but yeah I could give them a call.
I'll ask around about maybe cutting tie rods down and see if that might accomplish it. Suspension stuff is out of my territory I don't mess with that so I will see well I can find out.
 

· Registered
Joined
·
233 Posts
Discussion Starter · #6 ·
All I know is they say the camber a and casters are maxed out, not sure what 1 does over the other.
 
1 - 3 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top