I was just going to post and ask this also............

 

Hopefully someone will have a solution!!

 

Should be able to get those pieces from GM. Cheaper than a dash kit.

 

Cadillac Escalade Heated Steering Wheel 2007 - 2011 Black Leather Denali | eBay

This?

 

Well that would be one solution, but we are tailking about covering up the black inserts that always peel by the cruise control and radio switches. On the steering wheel in the link it would be the silver area.

 

Cruise control? That is the only thing I don't like about my truck, it doesn't have it. I would like to find out how to add it though. Mine is peeling a little too.

 

add the colum wiring harness,and clock spring and a steering wheel with cruise and radio controls,,ive got a couple wheels

 

Tread Heavy - I found these. 2007 2008 2009 2010 2011 Silverado Tahoe Steering Wheel Burl Spoke Covers | eBay

Wish they were not so much I would buy them now.

 

you could also just cover them with vinyl wrap

 

Mine are peeling as well. I actually contacted the eBay seller in the link a few post up. It appears you have to unplug (if that's the right word) the airbag to get those pieces replaced then reconnect the airbag. I'm not even gong to attemp that with my terrible mechanical skills. Probably would cost a lot.

But I was wondering... Anybody try using a razor blade to remove the rest of the peeling material? At least then it would all match.

 

their not that hard to take off,just pull the airbag,then the wheel,take off the screws that hold the switchs on,then un screw the covers ,try sanding them down and coating them with vinyl or plastic paint

 

3M vinyl wrap

Did mine a few weeks ago, whole effort took 30 minutes -

 

Did mine a few weeks ago, whole effort took 30 minutes -

That is vinyl wrap? Looks great!

 

3M vinyl wrap. I bought a 1' x 5' piece off eBay and did all the wood with a good foot or so left over.

Door plates were the hardest to get right, but overall a pretty low-key effort.