Chevy and GMC Duramax Diesel Forum banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter · #1 ·
I have the Cognito leveling kit on my truck and Im getting an uneven stance in the front when both torsion keys are cranked the same amount. my Driver side is 7/8 inch lower than the passenger side. Even with the driver side fully cranked and the passenger side 6-7 turns from fully cranked its still 1/8 higher on the passenger side. It seems to me that the passenger side is adjusting to levels properly and the driver side key is soft and less responsive to key being adjusted. They are oem equipment. Any suggestions? Also, when I lift the front end of the ground everything is even(bump stops the lower control arm distance)
 

·
Registered
Joined
·
35 Posts
Discussion Starter · #6 ·
Kinda what I figured with the extra weight. The passenger side is perfectly where I want it but the driver side is fully cranked and slightly lower than what looks level to me. I was thinking about getting lift keys so I can crank the driver side a little more. Or how much will a new drivers side t bar run me. P.S.- No Fat chicks here! That was awesome.Completely relevant question. The guy I bought it from however was probably around 290 and he had it since new.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top