Chevy and GMC Duramax Diesel Forum banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 4 of 4 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter · #1 ·
Anyone have any tricks to taking off the two bolts that go into the head and hold the mounting bracket. I can't get a wrench in there and can only get a swivel attached to an extension on one bolt. Has anyone done this before?
 

·
Premium Member
Joined
·
17,806 Posts
I cut the damn bracket and welded a tab on it so the upper piece will bolt to the lower bracket. Makes a cinch to remove now.

PM sent!
 

·
Registered
Joined
·
2,596 Posts
Their is NO reason you would need to so this unless you are making serious hp. Dont waste your time or money. Its worthless.
 

·
Registered
Joined
·
54 Posts
Discussion Starter · #4 ·
well I had an edge juice with attitude and it kept tripping a low fuel pressure code and throwing it into fuel limp mode. Figured for 15 bucks i could fix this problem, with an easy mod. Ended up being a little hard than i thought.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top