Chevy and GMC Duramax Diesel Forum banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 4 of 4 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter · #1 ·
Hello guys I have a couple sensors on my engine wire harness that don't seem to be connected to anything. No I do not have an EGR cooler anymore my EGR is deleted. But I do not know where these three sensor plugins go I would greatly appreciate help with that so I can find their home.
1087732
1087733
1087734
 

·
Registered
Joined
·
22 Posts
Along with the egr connector. The green connector is for the intake heater controls. There should also be a large red wire that was used for the actual heater element. If you have a different intake pipe those items were removed.
 

·
Registered
Joined
·
22 Posts
The grey connector that does not have orange in the middle is the intake temp sensor that is mounted to the y-bridge. Should be a 2 pin connector.
 
1 - 4 of 4 Posts
Top