Chevy and GMC Duramax Diesel Forum banner

21 - 24 of 24 Posts

·
Registered
Joined
·
860 Posts
Haha sort of

we don’t have kids and we’re both close to our mid thirties so times up in that department
Don’t give up if it’s something you want. Were 36 and 32. There’s all kinds of treatments for all kinds of problems and then theres just plain old luck. My wife and I got through school, got our life in order, got the house etc etc and did everything the way your “supposed” to do it then we tried for 5 years to have a baby. Had problems getting pregnant the whole time, 4 unexplained miscarriages that were hell to go through. Too many visits with multiple doctors and specialist to count and nobody could find shit wrong with either one of us. We had completely given up then it happened and all the bad shit we’d went through doesn’t matter anymore. Keep prayin and ya never know.

happiness is a sippy cup and a cruise in the Jeep (y)
1080549
 
  • Like
Reactions: jwcgmc1985

·
Most Known Unknown
Joined
·
29,608 Posts
Discussion Starter #22
In all honesty I don’t think we’re meant to be parents, which I’m 100% ok with. I’m a pretty basic person in a weird way, and I’ve had the same habits since I got on my own back in the day. Call me selfish but working my A$$ off and playing with stuff like this or vehicles is pretty much my MO. I’m not against it, we rolled the dice for a while and tried but it didn’t work, so she got the implant and now “in theory” I shouldn’t have to worry about any surprises in the future.

I’m not getting shipped though, Hell/Naw!!
 

·
Most Known Unknown
Joined
·
29,608 Posts
Discussion Starter #23
Started fiddling with this again

Started by getting the new bearings installed and getting the mount plate all figured out. Got the sprocket on and started getting the rear end all spaced correctly to fall inline with the width of the main frame.

B29E629F-F0FF-45F5-BAB3-E13C24547490.jpeg
8124DDEC-6B94-40CA-B4B3-852A2C8583DE.jpeg
7A35B495-C9B3-47CF-8AAB-8B212685D43D.jpeg
D632BEE1-CAB3-4264-A466-BDAD6DF583F0.jpeg
691A0E22-7E62-4588-9BB9-57473529389D.jpeg
5D0AF73C-403B-484B-B5EE-526A5D7E6D7B.jpeg
8ECF8A6F-5BBE-499F-8CBD-35D7F23D34FB.jpeg
A808D8B3-1B66-4A44-8CAC-C1F8A7A4FA1C.jpeg
51CE2E1B-35E0-4885-9A37-34ED64DDDB4A.png
 

·
Most Known Unknown
Joined
·
29,608 Posts
Discussion Starter #24
I ended up having to flip the arm on the drum brake so it would be tucked in better for my setup.

The nut at the end of the photo lineup will be hammered onto the end of the shaft and welded up.

As you can see, flipping the arm helped out!

F20A3D4B-2E59-47A2-95B3-149D6A2C24BC.jpeg
4DF39651-71DC-4DFC-A65E-5A97B5B272D1.jpeg
91CB762F-24E4-43A0-BCB3-145154D401FF.jpeg
673726A0-2D92-4922-A622-6F7F6B1F48F8.jpeg
EBE055FA-14E1-48F4-A910-D17135728E03.jpeg
78CFCC86-CCF6-48E6-BEBF-27B9FFF5D178.jpeg
 
21 - 24 of 24 Posts
Top