Chevy and GMC Duramax Diesel Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
316 Posts
Discussion Starter #1
Parting out an lb7 engine. Dropped a valve in #7 cylinder. Have everything but the cp3 for sale. I've got some parts ready to ship. Haven't tore into the bottom end yet. For sure have 7 good rods and pistons. The block could be bored, probably 40 over. That's all I know of. I'm gonna list the parts I have ready to go.

Turbo (no play, spins freely)- $275
Idler pulley- $30
Injector lines & rails, everything from the cp3 to the injectors- $100
FICM- $150
Pushrods- $30
(2) Fuel filer housing- $40
Full wiring harness- $150
Lb7 up pipes (both sides)- $75
Drivers side head (springs and all)- $150
also have 1 lbz and 1 lmm egr cooler- $40 each
Caltracs- $270

All prices are shipped. If there is anything I didn't list that you want, just PM me or text/call 217-653-0336. Leave a message if I don't answer. Thanks
 

·
Registered
Joined
·
831 Posts
Parting out an lb7 engine. Dropped a valve in #7 cylinder. Have everything but the cp3 for sale. I've got some parts ready to ship. Haven't tore into the bottom end yet. For sure have 7 good rods and pistons. The block could be bored, probably 40 over. That's all I know of. I'm gonna list the parts I have ready to go.

Turbo (no play, spins freely)- $275
Idler pulley- $30
Injector lines & rails, everything from the cp3 to the injectors- $100
FICM- $150
Pushrods- $30
(2) Fuel filer housing- $40
Full wiring harness- $150
Lb7 up pipes (both sides)- $75
Drivers side head (springs and all)- $150
also have 1 lbz and 1 lmm egr cooler- $40 each
Caltracs- $270

All prices are shipped. If there is anything I didn't list that you want, just PM me or text/call 217-653-0336. Leave a message if I don't answer. Thanks
How many miles on the sticks and cp3? How much to ship to 35121?
 

·
Registered
Joined
·
316 Posts
Discussion Starter #4
Keeping the cp3. Trucks odometer was 16x,xxx. But they had to have been replaced before. The balance rates on the injectors were within (+) or (-) 2 before the valve dropped. I'd take $600 for the injectors shipped.
 

·
Registered
Joined
·
304 Posts
Glow plugs and glow plug controller/harness?
 

·
Im Superrrrr!
Joined
·
14,517 Posts
any word on shortblock? condition? price?

Don't need pistons or rods.

I'm pretty close I could come pick it up.
 

·
Registered
Joined
·
589 Posts
do you have the plugs and harness? i'd like a price if you do
 

·
Registered
Joined
·
316 Posts
Discussion Starter #14
Have valve covers and plugs/harness. Pm me with offers
 

·
Registered
Joined
·
2,538 Posts
PM sent.
 

·
Premium Member
Joined
·
172 Posts
crank?
 
1 - 16 of 16 Posts
Top