[trailler2004]

im wondering if anybody has made there own coolant relocation stuff....i bought a set of ppe manifolds and up pipes and didnt buy the block off thing....if anybody has any pics or advice of what they did id appreciate it thanks!! :help

 

[JoeGorby]

I cut mine down and bent it to fit. IMO It would be easier to buy one

 

[trailler2004]

Ya...I may do that.

 

[trailler2004]

Pro fabs relocation fitting should work with the ppe manifolds and up pipes I would assume??

 

[JoeGorby]

Pro fabs relocation fitting should work with the ppe manifolds and up pipes I would assume??

yeah it should work... that's the only one I know of.

 

[trailler2004]

Ok thanks!

 

[DieselX-Darryl]

Coolant line relocation fitting LMM
This one works well.

 

[mreeves23]

Profabs relocation fitting should work as stated. Rick's a good guy to deal with.

 

[trailler2004]

so got the truck put back together and the one i got a pro fab one from dieselx but canot get it to quit leaking...the damn o ring keeps pushing up...any ideas...

 

[BLKLMM]

I had same issue...i cut my oe one, turned angle, and rewelded it....:thumb

 

[trailler2004]

Anybody know what I'd need to come from the thermastat housing and plug the one down by the oil filter?

 

[JoeGorby]

Anybody know what I'd need to come from the thermastat housing and plug the one down by the oil filter?

I don't know, but when you figure it out let me know!
When I switch my setup I pla on doing that. It shouldn't be hard, I just haven't had the time to look at it.

 

[trailler2004]

Yours leak also? Id use the stock one and bend it but phucked it up :/

 

[JoeGorby]

Mine doesn't leak, I just want to clean up my engine bay.... but I did fight the o-ring