Chevy and GMC Duramax Diesel Forum banner

New injector lines correct torque and still a crank case full of fuel!!

2352 Views 8 Replies 7 Participants Last post by  TxFullSize
Ok I had an 01' ecsb come in the other day pouring oil out of the crank vent. checked the balance rates with EFI and I got none of the balances were correct except one injector (-2). So i got Pensacola diesel to send me a set of remans and the install kit. I also bead blasted and cleaned the injector lines, flushed the fuel rails out and changed the fuel filter. Two days later the truck comes back with fuel in the crank case again! did the balance test again and everything check out fine there. So I tore into it thinking I didnt torque something down right (which I have forgotten to do once.) Re-torqued everything to specs re-assembled, changed the oil and drove it for about 20 miles. got back to the shop and pulled the dip stick only to find........... DIESEL IN THE OIL AGAIN!!!! Any idea guys?
1 - 1 of 9 Posts
If the lines were leaking the o-ring on the injector should keep most of it from going into the oil and you should see a pretty decent fuel leak. If not then chances are its an injector.

Sent from my Autoguide iPhone app
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.