Chevy and GMC Duramax Diesel Forum banner

43421 - 43440 of 44710 Posts

·
Premium Member
Joined
·
1,302 Posts
A few hundred mile day trip to Lake Placid, then played around with the idash 1.8 moving gauges around.
 

·
Registered
Joined
·
19 Posts
1500 Miles on the Heavy Chevy now. I did the second oil change. First at 500 Miles, Second one this morning. I used Mobil Delvac 15W40 and a Luberfiner filter. Then I topped off the DEF tank. Oh yeah, I installed a FUMONO drain valve too.


WC
 

·
Most Known Unknown
Joined
·
29,352 Posts
2008 Silverado Gasser:
Removed, scuffed, painted, wet sanded, then painted again...the wiper arms and installed new wipers

7B3B1CB9-8834-47FE-9639-648531F5EC10.jpg

F314C9EC-81D0-4EB1-8443-A8B5A5543F8A.jpg

AB5D9505-CB38-4973-B856-76EC340B8C7E.jpg

B101C8E5-ECC6-49EE-B068-FA2B3268CF9B.jpg
 

·
Premium Member
Joined
·
9,571 Posts
Drove the 01 to work again to haul some more water, really getting dry around here.
 

·
Registered
Joined
·
4,088 Posts
1500 Miles on the Heavy Chevy now. I did the second oil change. First at 500 Miles, Second one this morning. I used Mobil Delvac 15W40 and a Luberfiner filter. Then I topped off the DEF tank. Oh yeah, I installed a FUMONO drain valve too.





WC
You mean the dealer doesn't give free lifetime oil changes for these $70k trucks nowadays?!

Sent from my SM-G950U using Tapatalk
 

·
Registered
Joined
·
19 Posts
Today was a pretty exciting day.

Leveling kit and 285/75R18 Falken WildPeaks on the stock rims.





Now I need to get used to going 5 MPH over the Speedometer.

WC
 

·
Registered
Joined
·
2,135 Posts
Saturday: swapped to the drag racing setup

Sunday: raced

Tonight: lubed the front end and swapped rims back.
You got me beat ....

I rolled that thing into the shop and turned it off. I was in bed before the courtesy lights shut off.
 

·
Registered
Joined
·
774 Posts
Got a new trans tune downloaded from PPEI. Same increased line pressure, but higher shift points. Tryin to get the most out of the stocker til I build it.
 

·
Registered
Joined
·
2,135 Posts
Saturday: swapped to the drag racing setup

Sunday: raced

Tonight: lubed the front end and swapped rims back.
You got me beat ....

I rolled that thing into the shop last night and turned it off. I was in bed before the courtesy lights shut off.
 

·
Registered
Joined
·
19 Posts
Today was a pretty exciting day.

Leveling kit and 285/75R18 Falken WildPeaks on the stock rims.





Now I need to get used to going 5 MPH over the Speedometer.

WC
Lets try this again...
 

Attachments

·
Registered
Joined
·
17,580 Posts
You got me beat ....



I rolled that thing into the shop and turned it off. I was in bed before the courtesy lights shut off.
Did you run at the track tony?

Sent from my VS988 using Tapatalk
 

·
Registered
Joined
·
2,135 Posts
Did you run at the track tony?

Sent from my VS988 using Tapatalk
Yeah, I made a hand full of passes. Slightly beat my PB time in the truck. Considering all the conditions of the night though.... It's certainly running better and capable of more. Like Joe had said, track prep was non-existent. Still a good time though.
 

·
Registered
Joined
·
19,146 Posts
Did you run at the track tony?

Sent from my VS988 using Tapatalk
Yeah, I made a hand full of passes. Slightly beat my PB time in the truck. Considering all the conditions of the night though.... It's certainly running better and capable of more. Like Joe had said, track prep was non-existent. Still a good time though.
Yeah he got taken to gapplebees......... LOL
 

·
Registered
Joined
·
98 Posts
LML...

CP3 conversion
Full egr delete
5" straight pipe with axle dump
Air Dog 165 4g
Beans sump
S&B intake
EZ Lynk, PPEI tuning with trans tunes
Edge CTS2 with pyro and sotf
 
43421 - 43440 of 44710 Posts
Top