[07duallyjohn]

For the money, you can get great looking F450 take offs with tires for less than the price of new Alcoa’s without tires. I personally love the look of the large Ford caps and the Alcoa’s. I’ll just change the emblem in the middle. And yes, I know it’s a Ford wheel (really an Alcoa) but don’t really care as I know it’ll look great on my truck with the large caps

 

[07duallyjohn]

Search button is your friend. Here is my thread on this subject. FWIW, I used Arrowcraft adapters.

So you are considering installing Alcoa 19.5s on your...

Thought that I would post this to outline my trials and errors of going with Alcoa 19.5s on my dually. Where there is a lot of info on this on the various Ford and Dodge forums, I could not find a lot for GMs. Following is what I went through to finally get to what I was trying to accomplish...

www.duramaxforum.com

thanks jimmy yep I’ve tried the search button but haven’t been able to find an answer specific to my question. I’ve been following your thread since the start and it’s been the most informative but I think yours are10x285 not a 10x225 wheel correct? Thanks for the great post, it has helped me a lot when I started looking at this project.

 

[07duallyjohn]

Ford did not use the Alco on the F450, so I would guess they are not true Alco on the 750's either.

thanks, I assumed they were Alcoa’s but you very well could be right. There are just a Lot of good deals on 450 take offs and I like the look of the wheel and caps.

 

[07duallyjohn]

Correct, thus making your response and thread not useful in my situation as I’m looking for 10x225 adapters and someone who has successfully used them. They are more of an oddball adapter as the bolt patterns are close to each other. I am sure I am going to a 19.5 and understand the pitfalls of the 19.5 size thanks to your thread, but the initial
Question about the adapter remain to be answered. Thanks for your insight thus far, I’m sure someone has used a 10x225 adapter here. Thanks again!

Not quite sure what you are asking. If you are asking about the bolt hole pattern for the wheels on my dually they are 10 x 275. This may help:

https://www.alcoawheels.com/alcoawheels/catalog/pdf/brochures/M_Series_SellSheet_final_printable.pdf